| Heavy Duty Container Crate Box - Industrial Euro Stacking Plastic Storage Boxes |
 |
 |
 |
7/24 CUSTOMER SERVICES |
 |
LOWEST PRICE |
 |
CUSTOMER SATISFACTION |
 |
SAME DAY DISPATCH / Order before 13.00 pm for the Same Day Dispatch. |
| PRODUCTS |
| Blue 20lt 300x400x230 mm | Grey 20lt 300x400x230 mm |
| Blue 63lt 400x600x340 mm | Grey 63lt 400x600x340 mm |
| ITEM DESCRIPTION | |
| DENSITY | The density measurements of raw materials, semi-finished and finished products are carried out according to ASTM D 792 test standards. The density of a solid sample without any hole inside is determined by weighing it in dry air first and then measuring the liquid displaced when placed in alcohol with specific density. |
| FILLER RATIO | Filler ratio of the orijinal and recycle raw materials are measured by oven equipment and measurements performed in terms of percent according to ISO-3451-1 standard. |
| MOISTURE | Moisture content of the raw material granules are carried out by Aquatrac method and determined in percent. |
| DIMENSIONAL MEASUREMENTS | Size measurements of semi-finished and finished products are made in comparison with technical pictures. |
| PRODUCT PERFORMANCE MEASURE | The pallets are subject to rack, static and dynamic tests in accordance with ISO 8611-1:2011 standards. |
| MELT FLOW INDEX (MFI) | Melt Flow Index (MFI) of orijinal and recycle plastic raw material is measured in g/10 min. using Melt Flow Index device in accordance with ISO 1133 standards under specific temperatures and pressure conditions. For this test the melted plastic material is forced through a capillary tube with applied load to detect how much material flows in 10 minutes. Viscosity is one of the most important parameters for material processing and molding. |
| CHARPY IMPACT STRENGTH | Charpy impact test is done to measure the amount of energy that is absorbed by the material and the results used for evaluation of crispiness of the material. Notched and unnotched test samples produced with related original or recycle raw material and Izod Impact Strength test is performed in terms of kj/m2 according to ISO 179. The fracture resistance of the material should be measured by Izod Impact Strength test for high impact strength material selection. |
| HARDNESS | Shore D hardness of the raw materials, are carried out according to ISO 868 standard. Hardness is indicates of deformation resistance of the plastic. |
| FILLING DETERMINATION | The amount of filler material of the original and recycled raw materials is determined by the Ash Furnace equipment and equipments as% according to ALKT-509 standard. The filling ratio of the material affects all properties, especially the mechanical properties. |
| DIFFERENTIAL SCALE CALORIMETRY (DSC) | Determines the energy change in accordance with temperature. |
| UNIVERSAL TEST SYSTEM | The mechanical properties of raw material used is determined with the aid of tensile, pressure, bending, peeling, tearing and basic cycle tests carried out according to ISO 527 standards |
| COLOR DETECTION | Colour control is carried out using spectrophotometer with reference to RAL and Pantone catalogues |
| ELECTRO STATIC (ESD) DISCHARGE | ESD measurements of the products which produced for electronic industry are carried out by Megaohmmeter according to EN 50081-1 and EN 50082-1. The boxes which produced with ESD raw materials protect the product inside and prevent damage during manfacturing, transporting and storage. |
| VERTICAL COMBUSTION CABINET | The combustion rate of raw material is determined in V0, V1, V2 scales in compliance with UL94 standards |
| STACKING TEST | Possible product deformations are predetermined, by simulating real use conditions. |
IMPORTANT NOTICE:
Please buy Next Day Delivery for your products that need to be delivered urgently.
(if you want them to be delivered within 1 day).
We will do our best to deliver the product to you as quickly as possible.
Same Day Dispatch: Order before 13:00 pm
Next-Day Shipping Price 3.90 GBP
| CLICK HERE TO SEE OTHER PRODUCTS IN OUR STORE |