Multi-Language: English , French , Russian , Spanish ,German, Italian ,Portuguese, Japanese, Chinese
Features:
【Vehicle Diagnoses Doctor】
YA-101 is an upgraded version of basic obd2 scanners with feature complete support of all 10 modes of obd2; including reading and erasure of current codes, O2 Sensor Tests, On-Board Monitor Test (Mode 6), EVAP System Test (Mode 8), I/M Readiness, Vehicle Info, etc,.Help you pass the Smog check!
【View Live Data & DTCs Lookup】
View Freeze Frame/Live Data streams, Live O2 monitoring, Misfire, Engine Coolant Temperature and Engine RPM Data; view real-time PID data from ECM; built-in DTC lookup library with definitions.
【All OBDII protocols Vehicles Coverage + 9 Languages】
Works with most 12V gasoline vehicles sold in the USA since 2000. Supports all OBD2 Protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN. Support for 9 languages: Simplified Chinese, German, English, Spanish, French, Italian, Japanese, Traditional Chinese, Russian.
【Garage Necessity】
Plug and play function,easy to use.
Add Battery Test Function to view of Battery Status;
color display;
FREE LIFETIME software updates via USB port. It is recommended as a necessity in your garage/ Home and Autoshop.
PLEASE NOTE:this tool only works on 12V cars, not NOT WORK FOR 24V truck.
Why the YA-101 Car Code Reader deserve to own?
1. Read Codes: Reads DTCs from vehicle's computer with KOEO or KOER.
2. Erase Codes: Deletes DTCs from vehicle's memory.
3. Live Data: Live Data menu lets you view, record and playback real time PIDs data fromthe electronic control module. In live data menu, you can insert the selected item to front by holdingpressing the key for 3 seconds.
4. Freeze Frame: Displays a snapshot of operating conditions at the time of a fault.
5. Battery Test: EDIAG YA101 support Battery test.
6. Vehicle Info:Scan tool displays the vehicle's VIN number, Calibration ID (s) and CVN that identify the software version in the vehicles control module (s.) The tool also displays In-Use Performance Tracking of important readiness monitors.
7. Component Test: Tool will display a list of components and their locations on the vehicle.This function will always appear on the Main Menu .This selection will appear on the Diagnostic Menu only when the toollhas a list of component locations for the currently selected vehicle.
8. On-Board Monitoring: Scan tool controls the operation of vehicle components, tests or systems.
9. O2 Sensor Test:Displays oxygen sensor monitoring test results from the vehicle's memory,the O2 Monitor Test is NOT an ON-DEMAND TEST. If the engine light is not turned off in time. it will Cause Serious environmental pollution
10. I/M Readiness: Displays a snapshot of the state of the vehicle's OBDII Monitors.
* To review I/M Readiness status,make sure that the ignition key is switched to ON with the engine off.
* Not all monitors are supported by all vehicles.There are two types of l/M Readiness tests:
* Since DTCs Cleared -shows status of the monitors since the DTCs werelast cleared.
* This Drive Cycle-shows status of monitors since the start of the currentdrive cycle.
11. DTC Look Up: Looks up definitions of DTCs stored in scan tool, and shows the possible causes of the DTC. (NOT every DTC with possible causes reason)
12. Voltage Test: This function is used to monitor the voltage present on pin 16 of the OBDIIData Link Connector.
13. Data Logging: Turn on /off the data log function to record the device data through vehicle.
14. Self-test: Display Test. Used to check the display screen. Keyboard Test. Verifies that the keys are working correctly.
15. Lifetime Free Update: pls install update tool from Official webiste, and copy the newest firmware, paste to the YA101.
16. Scrreenshot Function
、