Piston 0401201 by MAHLE ORIGINAL - Single
Genuine OE Mahle Piston 0850L105+1A04 10002067-013 COMPLETE 0401201 401201
MAHLE's premise is original equipment quality. Whether MAHLE offers a product in the independent aftermarket or for OEMs, the products meet the same high requirements. You always play it safe when using a product or service from MAHLE. You can count on it.
MAHLE provides years of experience and innovative solutions—and continuously adjusts the existing product range to tomorrow's requirements.
The thermal and mechanical loads on pistons in modern gasoline and diesel engines have seen a massive increase, primarily due to higher levels of specific output. Furthermore, the pistons are intended to increase engine efficiency, for example through reduced weight and friction. The MAHLE product range includes highly stress-resistant pistons that contribute to reducing fuel consumption for both types of combustion:
PRODUCT SPECIFIC INFO:
If you are unsure as to whether this is the correct part for your vehicle, please don't hesitate to contact us. Alternatively please use the cross reference table above or check the MAHLE part finder link HERE
Disclaimer: We have taken every care is taken in putting together lists of suitable vehicle compatibilities and component cross references, they are given for general guidance only, and they do not constitute any contractual term, representation or warranty and as such the supplier (Diy Car Service Parts) do not accept any responsibility in respect of any claim whatsoever and howsoever caused arising from the publication of this listing. It remains the responsibility of you (the customer) to check the specification of this item and carefully compare to your original before ordering/installing.
Pack Size | 1 Single Unit |
---|---|
Part_Number | 0401201 |
Manufacturer | Mahle |
Length | 77,705 mm |
Product type | Piston |
Weight (g) | 1032 |
Supplementary Article / Supplementary info | with piston rings, Coated, with piston ring carrier, with cooling duct, with cut-out for oil jet |
Supplementary Article / Info 2 | with cooling duct |
Surface | Coated |
Section | Courier |
Manufacturer Part Number | 0401201 |
Bolt distance | 30 mm |
Cylinder bore | 85,4 mm |
Compression height | 48,705 mm |
Valve pocket depth1 | 0,45 mm |
Recess depth1 | 18 mm |
Recess diameter | 40,8 mm |
Bolt | 30 mm |
Bolt length | 68 mm |
Component number | 2. M 2,0 IFU, 3. DSF 3,0 Cr |
Machined | with cut-out for oil jet |
MPN | 0401201 |
Cross Reference | 40406610,WG1016608,WG1213054 |
GSP Website Postage Zone | UK Only |
Production Number | 85 L 105 |
Type | Piston |
Brand | MAHLE ORIGINAL |