1 each Fluke Model 41B Power Harmonics Analyzer including:

 1.            Main analyzer unit with:

a.            Excellent condition, may need calibration

b.            Test leads

c.            Test probes

d.            Alligator clamp test probes

e.            Low and high range current clamps

f.             Optical output to serial cable

g.            Original box and documents

h.            Requires 4each “C” cell batteries

i.             Software copy and software guide with:

i.             Fluke41B Quick Reference Guide

ii.            Fluke41B Power Harmonics User Manual

iii.           SW41FlukeView User Manual

iv.           Fluke80i-110s AC/DC Low Current Probe Manual

v.            Fluke80i-500s AC Current Clamp Probe Manual

2.            Fluke80i-500s AC Current Clamp Probe

a.            Current Range: 1A to 500A AC rms

b.            Basic Accuracy 45Hz to 65Hz: ± (5% of reading + 0.3A)

c.            Output Signal: 1 mV AC per 1A AC, 1000:1 division ratio

d.            Bandwidth:5 Hz to 10 kHz

e.            Working Voltage: 600V AC rms

f.             Maximum Conductor Size: 30mm (1.18 inch) diameter

g.            Safety Rating: 600V rms. CAT III per IEC 1010-02-032

3.            Fluke80i-110s AC/DC Low Current Clamp Probe

a.            Current Range: 0.1 to 100A DC or 0.1 to 100A AC

b.            Basic Accuracy (DC to 1kHz):

i.             100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA

ii.            10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA

iii.           40A to80A +/- 12% of reading + 50mA

iv.           80 to 100A+/- 15% of reading

c.            Output Signal: 10A range: 100mV/A | 100A range: 10mV/A

d.            Bandwidth:1Hz to 20kHz

e.            Working Voltage: 600V AC rms

f.             Maximum Conductor Size: 11.8 mm (.46 inch) diameter

g.            Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V