AC Compressors:

Compressors are the heart of the A/C system, with a heavy responsibility to pump A/C refrigerant throughout the automobile’s A/C system. We take the upmost care when developing new compressors. We always make sure that our new compressors meet exact specifications, When you purchase a new compressor from Topcn, you are receiving a high quality product at price that is very affordable.

Feature:

 

【PREMIUM ALUMINUM QUALITY】- Excellent material adopts fine workmanship with a stable structure. It is wear-resistant, anti-corrosion, and anti-rust. Grooves: 6. Pulley Diameter: 4.7"/ 120 mm.

【STRONG COOLING FUNCTION】- Fabulous compression ability effectively improves the cooling effect. Good heat dissipation and ventilation will not cause load and damage to the water tank radiator.

【LOW NOISE & FUEL CONSUMPTION】- Low output power can reduce motor load and fuel consumption during work; Effective environmental protection conforms to energy saving. A small vibration amplitude provides more comfortable and low noise.

【EASY INSTALLATION】- Effective detection function tested carefully before its delivery. No need to weld or adjust during installation.

【VEHICLE Fit For MENT】- It is highly compatible with most air-conditioning compressors of corresponding car models. The overall performance of the car improved.

 

 

Fit For For:

​

2001-2002 For acura MDX All Submodels All Engines   

2004         For honda ODYSSEY All Submodels All Engines  

2002-2003 For honda ODYSSEY EX V6 3.5L  

2002-2003 For honda ODYSSEY LX V6 3.5L  

2002         For honda ODYSSEY CARGO V6 3.5L  

1999-2001 For honda ODYSSEY All Submodels All Engines    

2003-2004 For honda PILOT All Submodels All Engines  

 

Interchange Part Number:

 

• AC Delco: 1521227
• For acura/For honda: 38810P8FA01
• Austin Baker: 10345490
• Austin Baker: 10350041
• Autocomp Technologies: 1029000
• Autocomp Technologies: 1129000
• Autocomp Technologies: 1229000
• Compressor Works: 638844
• Delphi Automotive Systems: CS20103
• Denso Automotive Systems: 4710276
• Denso Automotive Systems: 4711276
• Four Seasons: 77342
• Four Seasons: 78342
• Global Parts Distributors: 5511855
• Global Parts Distributors: 6511855
• Global Parts Distributors: 7511855
• Hodyon: 295937NH
• NAPA: 254415
• NAPA: 274520
• NAPA: TEM254415
• NAPA: TEM274520
• Omega: 2011255
• Omega: 2011255AM
• Omega: 2011255R
• Ranshu: 140049C
• Ranshu: 140071
• Ranshu: 140071C
• Ranshu: 140071NEW
• Ready-Aire/Proliance: 2336N
• Spectra Premium: 0610039
• Trad Automotive: C559
• Trad Automotive: C559R
• Valeo: 10000664
• Visteon: 000025
• UAC: CO 29000C

 

 

Installation Method

1. Remove compressor:

 

Remove the A/C belt from the A/C compressor pulley. May involve loosening the belt tensioner (if equipped).

 

2.receiver drier or accumulator, orifice tube or expansion valve.

 

3.Disconnect the negative battery cable.

 

4.Remove the bolt that secures refrigerant lines to the A/C compressor. Inspect A/C lines for any contamination such as metal or excessive dirt inside of them. If you find any contamination the system will need to be cleaned.Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems. The valve must be removed before the  evaporator can be flushed. Flushed condensers from outlet to inlet and evaporators from inlet to outlet.  

 

5.Drain all the oil from the new compressor ,if you compressor has a drain plug you will need to open it up and drain what oil is in there too.

 

6.Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.

 

7.Install new receiver drier or accumulator and new orifice tube or expansion valve.

8.Evacuate the A/C system for a minimum of one hour.

 

9.After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.

 

10.Turn on the A/C system with the engine running and check to see if cold air is now coming out of the air duct.

 

11.If the A/C system is functioning ,you may find that your electric radiator fan and compressor clutch will be cycling off and on depending on the outside air temperature

 

 

 

Automobile Air Compressor Installation Instruction:

 

I. The function of air compressor is to compress air, not to cool air. A product that has no signs of leakage, abnormal sound and has sufficient pressure can be certificated as a qualified product.

 

II. If the original automobile compressor is broken, it indicates the original automobile air conditioning system has already failed. The causes of the failure can be summarized as follows:

 

(1) Poor heat dissipation and too much fluoride will cause impressively high pressure, overwhelming the capacity of the compressor and causing components of the connection rod broken or burning lock;

 

(2)Because of too long vehicle service, the compressor is aging seriously and produces organic carbide ,which will impede water from being drained out by making the pipes blocked or the deliquefaction jar invalid, resulted in  pipeline ice blockage;

 

(3)The installed pipe assembly isn't fixed properly, resulted in air leakage.

 

 III. The following steps shall be followed before the replacement of the compressor:

 

(1) Clean all pipes of the air conditioning system individually, inject cleaning agent into the condenser and evaporator and soak them for about 20 minutes. Pour out the cleaning agent and dirt with high-pressure nitrogen. The deliquefaction jar, fluid collector and throttle shall not be cleaned; make sure that no residue of the cleaning agent remains in the system; desiccate the refrigerant circuit, if necessary;

 

(2)Clean the surface of the condenser and evaporator, check if the cooling fans' speed is normal;

 

(3)Clean or replace the expansion valve; the deliquefaction jar and pipe filter shall be replaced;

 

(4) Check and correct oil filling level and oil viscosity before installing the compressor; vacuumize, fill fluorine, check high pressure and low pressure. Usually, the normal ranges of high pressure and low pressure are 180-200Psi and 30-40Psi respectively. If the pressure is abnormal, diagnose and troubleshoot first before installing the compressor;

 

(5)Check and correct oil filling level and oil viscosity before installing the compressor.

 

 

 

Note:

Be sure to clean the air conditioning system before installation, otherwise it will cause compression broken.

 

If the original automobile compressor is jammed and shows cylinder scoring, make sure to clean the pipes and replace the heatsink net. Because the specific characteristics of the heat sink net, the above mentioned problems would produce Aluminum scrap, iron powder and residues that cannot be eliminated. Warranty will not be provided in case of the following circumstance: install the compressor without cleaning the pipes and replacing the heatsink net, which would cause cylinder scoring and lock of the newly installed compressor immediately.