• Gas fireplace remote control thermostat has a Touch Key Press and a yellow backlight for better vision at night ,Remote allows you to turn your gas logs on/off or set the temperature you want , Receiver connects to any standard millivolt gas valve system


• Attention :This kit does not work with Latching Solenoid gas valve systems please read your fireplace directions for correct application before purchase.

• Includes : Remote - Receiver - Wiring assembly - Plastic wall anchors for the transmitter - Screws

• Pre-programmed for quick Installation simply connect the two terminals to the TH and TH/TP terminals of the millivolt valve.

• Direct replacement for Skytech - Ambient -Majestic - Monessen - Vermont Castings Fireplaces and Stoves

• For time clock settings , press the On button from the remote and then press and hold the Time button on the remote for 3 seconds

• Settings F and C Temperature : Unlock the remote, and then press the On button , then press C/F button

• To activate the child - proof protection : Press the lock button on the remote and the remote will be locked, to release press again .

• Pairing : 1- From the receiver push the gear into Remote position , led light will flash and the receiver will make a beep sound .2- Press the power button from the remote , the fireplace will light on ,that means pairing successfully.(NOTE: if pairing unsuccessful, repeat step 1and 2)

The-new-style Gas Fireplace Remote Control Kit, Thermostatic On/Off Remote Control Set for Millivolt Valve System

• Remote control and receiver with AUTO Thermostat or manually Function for Millivolt valve system

• It can Direct replacement for SKYTECH - Ambient -Majestic - Monessen - Vermont Castings Fireplaces and Stoves

• This wireless thermostatic on/off/ remote control system provides a safe, reliable, and user friendly remote control for millivolt valve gas appliances

• This remote control system requires (2) “AAA” and (4) “AA” batteries to power the transmitter and receiver (BATTERIES NOT INCLUDED)

• Attention : This kit does not work with Latching Solenoid gas valve systems please read your fireplace directions for correct application before purchase


  • RECEIVER

    • Pre-programmed for quick Installation

    • Low batterie indication

    • Press to open the batterie door, install the • batteries

    • From the receiver you can turn On and Off the fireplace by pushing the On/ Off gear.

    • To use with the Transmitter push the gear into the Remote position

    • Receiver connects to any standard millivolt gas valve system

    TRANSMITTER

    • Remote control has a Touch Key Press and a yellow backlight for better vision at night

    • Remote allows you to turn your gas logs on/off or set the temperature you want

    Important Safety Information

    • Always check the appliance home owner’s manual for additional information, or warnings regarding accessory installation before connecting this remote control system

    • This remote control system is designed for use with a millivolt or 24V gas valve system

    • Do not use this remote control system on applications with voltages above 24 Volts AC/DC and 1 amp current

    • Do not short (or jumper) across the gas valve terminals to test the remote control installation

    • Do not use 2 or more remote control systems in the same area , as they will communicate with each other . This may cause the appliance to not work properly

    • NOTE : Due to sensitive temperature monitoring components in the transmitter , allow the transmitter 15 minutes to stabilize the room temperature before accurate room temperature are displayed