Automatic Hot Candle Wax Dispenser Liquid Filling Machines Hot Wax Pouring Machine Candle Pouring Equipment

It has a positive and reverse wax return function. It has large power and is not easy to block. Even if it is blocked, it is very
convenient to clean.
This Hot Candle Wax Dispenser Liquid Filling Machines adopts the micro motor self-priming cycloidal pump head, and uses the microcomputer to control the working time andintermittent time of the pump. It is a device for quantitative automatic filling and automatic setting of filling time. Suitable for filling more than 5ml oily liquid, such as candle, butter, crystal candle, edible oil, salad oil, etc.
If you need to fill candles, melt the candles into liquid in the matching heating bucket, and then press our operation to
facilitate filling. The trolley can be used for mobile filling.

Usage method of the Hot Wax Pouring Machine:

Prepare the liquid to be filled, connect the 220v power supply, adjust the filling time, the interval time and the timer, press
the inching switch to test the machine, the motor works normally, press the manual key, and use the foot switch to control the
operation of the filling machine. Step on it, the filling machine will work once, and press the automatic key, the filling machine
will work automatically and continuously according to the set time.

Operating Steps of the Hot Wax Pouring Machine Candle Pouring Equipment:
1. Filling time adjustment
A. Press the setting key first, the time flashes, and press the increase key 0-9 to set the time required for this bit.
B. Then press the right shift button to position the finger, press the increase button to adjust the time of this bit, and repeat
the operation.
C. Press the unit key to move the decimal point back and forth to determine the time unit
D. Press the Exit key to complete the setting.
2. The intermittent time adjustment is the same as the filling time adjustment
3. Timer adjustment
A. Press the setting key, the timer flashes, press the increase key 0-9 to adjust the number of this bit, press the right shift to adjust the number of other bits, and set the required number
B. Press the mode key, when the light is on, the filling machine will stop working when the specified quantity is filled. When it is not lit, it works continuously and counts continuously.
4. Filling setting Press the filling setting button, and the filling machine starts to work. When the filling reaches the required
amount, press the filling setting button. The time displayed on the filling time is the time required for filling this amount.

The features of this Hot Wax Pouring Machine Candle Pouring Equipment are:

1. The filling time can be adjusted to 999 seconds, which is only 99 seconds for similar products.
2. The filling setting function can quickly set the time required for the filling volume
3. The controller of the filling machine is usually displayed in Chinese, and the operation is simple and clear
4. The machine adopts steel pump head, which is high temperature resistant and suitable for filling butter and candles
5. The pump head is easy to disassemble and clean, powerful and not afraid of blockage.