5L Bond It PVA Contractors Adhesive & Sealer All Purpose Primer Bonding Agent

Description:
An all purpose, high quality primer, sealer and bonding agent that dries quickly to give high bond strength.Uses
CONTRACTORS PVA can be used with plaster, cement, timber,
gypsum wall boards and paper. Properties as an adhesive include
fast drying. It is also a readily dilutable primer for sealing
applications or addition to cement and plaster to improve
adhesion and cure.

Applications:
w Plaster primer, porous surface primer and sealer.
w Rendering key coat.
w Admixture.
w Dust sealer.
w General purpose adhesive for bonding all common construction
materials.
w Phthalate Free formulation.

Preparation
All surfaces must be clean, dry and free from dust, grease or
contaminants that may hinder adhesion. Remove all loose
material and ensure underlying material is strong enough to take
the weight or load to be applied.

Application
As a primer: Suitable as a primer for renderings, for bonding new
plaster to old plaster, on porous brick, stone, floor tiles and new
plasterboard. Dilute 1 part CG PVA with 2 parts water and mix
well. Apply using a brush, working material well into crevices and
gaps. Allow coat to dry before continuing.
Key coat & bonding aid:
For use as a key coat for new plaster, concrete repairs, cement
screeds and renders. Prime as above then brush apply second coat
of CG PVA undiluted and apply topping whilst CG PVA A is still
tacky.
As a key coat for ceramic tiles and painted surfaces, first ensure
that the surfaces will withstand loading on new plaster. Apply
Bond It CG PVA undiluted and trowel on plaster whilst still tacky.
An alternative for these surfaces is to use Bond
It PREGRIT or to mix 1 part CG PVA with 1 part
water and use to slurry a blend of 1 part
Portland cement to 2 parts clean sharp sand
and apply with a notched trowel. Allow to dry
for a minimum of 24 hours and then apply a
top coat of plaster or cement.
Key Coat for porous and rough surfaces, bonding paving, terrazzo,
quarry, slate and floor tiles. Prime the floor and back of the tiles
as specified under priming. Mix 4 parts CG PVA with 1 part water
and coat floor and tile backs. While still tacky apply sand and
cement slurry to the floor and bed in the tiles. The bedding should
be of a minimum 3mm.
As an adhesive: Apply to one side and bring together within 3-5
minutes, apply constant moderate pressure by clamps or weights.
As an admixture: CG PVA will improve workability and adhesion of
plasters and cements.
Cement Admixture: Prime as above then mix 1 part CG PVA :1 part
gauging water and add to cement in place of the gauging water.
Plaster admixture: Prime as above then mix 1 part CG PVA : 2.5
parts gauging water and add to plaster in place of the gauging
water.
Limitations
Do not use in areas where permanent dampness is likely. Do not
use on new cement when cement has not fully cured, or on
surface temperatures below +5o
C.
Shelf Life
24 months from date of manufacture when stored in original,
unopened bottles.
Storage Conditions
Store in cool, dry conditions in original, unopened containers.
Protect from frost.
Never compromise on quality!

V5 15/8/22
Supercedes: V4 20/05/20
BOND IT
Head Office: Unit G16 River Bank Way, Lowfields Business Park,
Elland, West Yorkshire HX5 9DN.

Telephone: [phone removed by eBay] Fax [phone removed by eBay]
Email: [email removed by eBay] Website: www.bonditgroup.com
The data presented in this
leaflet are in accordance with
the present state of our
knowledge, but do not absolve
the user from carefully
checking all supplies
immediately on receipt. We
reserve the right to alter
product constants within the
scope of technical progress or
new developments. The
recommendations made in this
leaflet should be checked by
preliminary trials because of
conditions during processing
over which we have no
control, especially where other
companies raw materials are
also being used. The
recommendations do not
absolve the user from the
obligation of investigating the
possibility of infringement of
third parties rights and, if
necessary clarifying the
position.

Recommendations for use do
not constitute a warranty,
either expressed or implied, of
the fitness or suitability of the
products for a particular
purpose.

Code: BDAC5
Size: 5L

 
Certificate Number:
6152
ISO 9001; ISO 14001;
ISO 45001

Specification Summary
Polymer Type Vinyl Acetate Homopolymer
Plasticiser Phthalate free
% Plasticiser 9% on polymer
Total Solids 20% (+/-1%)
Specific Gravity 1.04
Brookfield viscosity @25o
C RVT Spindle 5 @ 20 rpm 100-140 Poise
Appearance White liquid

Disposal of Containers
Do not leave empty containers where residue could be harmful to
children, animals or the environment. Replace lids and remove
any containers to a central disposal point in accordance with local
regulations. Any spillages should be mopped up immediately with
an inert absorbent material such as sand or sawdust.
 
 
Package Content:
PVA CONTRACTORS GRADE ADHESIVE & SEALER / P.V.A GLUE / PRIMER 5L