1.Place the transmitter and receiver close together

2.Turn on the transmitter power switch and power on the receiver

3.Press the(ID SET)switch on the side of the receiver for more than 1 second,the red light will start flashing,indicating the start of code pairing.

4.When the red indicator of the receiver stops flashing and turns to normal light,it indicates that the code pairing is completed.If the code is not successful,the receiver red

indicator light will flash slowly.

Specification:

Number of channels:11 channels for PWM signal mode;12 channels for SBUS signal mode

Operating voltage:4.8-10V

Operating current:38-45mA(input voltage 5V)

Size:L*W*H=50*31.5*14.5MM

Weight:14g

integrated signal strength,receiver voltage data return and RSSI value,and support the external expansion of the return module PRM-01,return

transmission of power battery voltage information,with OSD back transmission module PRM-03,back transmission of latitude,longitude, star number,distance,climbing,and

speed and other information

Resolution:4096,0.25us per stage with high accuracy,making all servos as still as water

Support SBUS and PWM signal output at the same time

Remote control distance:about 4KM in the air,the actual control distance is related to the flight environment

Package includes:

1*R12DS Receiver

Note:

Each transmitter has an individual ID code.Before starting to use the device,the receiver must be matched with the transmitter.Once the pairing is complete,the ID code is stored in the receiver and does not need to be repaired.When you purchase a new R12DS receiver,it must be re-coded or the receiver will not function properly.