About this project：
*Gas tank vent cap are made of high-quality PE plastic, ensuring durability and longevity. No need for pliers to open when the gas can is vacuumed and no popping when the can is pressurized either.
*Drill a hole into the can, or use a step drill bit with an 18 normal drill bit as a pilot drill and drill the step bit to a half-inch hole.
*If the hole of the gas tank vent cap is drilled a little bigger, use a touch of sealant/silicon to the outer rim of the vent cap insert. It needs to be securely fastened to the gas tank to provide a good leak-proof seal.
*Retrofit these inconvenient gas cans with the vent cap insert to function properly and avoid spillage on your mower.
*Drill a hole into the can, or use a step drill bit with an 18 normal drill bit as a pilot drill and drill the step bit to a half-inch hole.
*If the hole of the gas tank vent cap is drilled a little bigger, use a touch of sealant/silicon to the outer rim of the vent cap insert. It needs to be securely fastened to the gas tank to provide a good leak-proof seal.
*Retrofit these inconvenient gas cans with the vent cap insert to function properly and avoid spillage on your mower.
Product Features：
- Use On Gas, Fuel, Diesel, Kerosene, or Water Cans
- Provides a Leak-Free, Smoother and Faster Flow
- Retaining Lip Prevents Vent from Popping Out of the Can when Temperatures Fluctuate
- Works with Plastic and Metal Containers
- Provides a Tight, Snug, and Secure Fit
- Easy Installation - See Below
- Close Your Vent Cap During Transportation to Provide a Leak Free, Spill Proof Ride
Drill a 8mm Hole Into the Can
Push the Vent Into the Hole
Push the Vent Into the Hole
Package Included：
8x Spout sealing caps
