1. This Three rings head electric shaver can make you clean faster, easier and more effective. The head of the blade can be uneven according to the contours of the face, and close to the face, so you have a more comfortable feeling of shaving more close to the face.2、Blade automatic grinding blade network. Razor in the work, the blade and the hard alloy mesh constantly grinding, can often keep the blade sharp.3, the first use of this model, please first charge 8 hours in use, if you do not use the interval of half a month, be sure to charge 8 hours before use, to ensure that the rechargeable battery does not lose power, to maintain the battery capacity, so that only Ting long razor life.4, this shaver battery (1.2V) repeatedly charged 500 times, the capacity remains unchanged.5, this shaver is a high speed silver palladium motor, long life, the bottom of the noise, power, light vibration.
Razor use tips
1, the head every four weeks need to be thoroughly cleaned once, remove the mesh frame, 5 cm from the frame sprayed with a special cleaner, later you can use a small brush to remove the scruff and dirt in the head.
2, the head of the knife with a small brush to clean, do not neglect to clean the mesh with a small brush to avoid damage.
3、Each time after shaving to remove the retina frame, tap a few times on the plane and then re-installed.
4、Every time after use cover the retina head protection cover, to prevent damage to the retina.
5、In order to ensure the high level of electric shaver effect, it is especially recommended that you prefer to replace the head and the whole set of blade every two years.
6、In order to maintain the service life of the battery inside the machine, every six months or so the razor will be completely discharged in normal use, and then re-charged.
7, because the face will be slightly expanded after washing, so it is best to shave before washing, morning after waking up before washing face is the ideal time to shave.
8、When using the mesh shaver, please keep the shaver perpendicular to your face and hold the electric shaver at a 90 degree right angle direction.
9、Because the beard is growing downward, shave in the opposite direction to make the scruff stand up and easy to shave, so shave from bottom to top in the opposite direction.
10, when shaving with your hands to pull the skin tight, do not vigorously push the head, just gently slide through the beard area will be able to shave the scruff clean.
Charging Method
1、Be sure to use AC 220V/50Hz charging2、Close the switch, push out the charging pins, and plug into the power outlet.3, the switch is not closed, can not be charged.4、The charging indicator light is on when charging.5, the standard charging time is 2 hours.【Caution】.
Do not charge in areas where the rated voltage exceeds 240V, otherwise a malfunction will occur.Do not charge continuously for more than 24 hours, and do not charge when the temperature is below 0℃ or above 40℃, otherwise it will shorten the battery life.Do not rinse the body with water, and do not bring it into the bathroom to use, or it will malfunction.When the body part of the dirty dirt, use a soft cloth with a neutral detergent wipe test. Do not use alcohol, gasoline wipe test.When the product in the charging or use of abnormal conditions (such as smell, temperature, sound abnormal) should immediately cut off the power, and stop using.
Correct use and maintenance of electric razor, not only can achieve satisfactory shaving effect, but also can extend the service life of electric razor. Use should pay attention to the following aspects.1, the installation of the power supply should pay attention to the polarity of the dry battery or charger to prevent the motor reversal, thus damaging the fixed blade and dynamic blade.2, shaving, the fixed blade should be close to the face slowly push, to move against the direction of the growth of the beard, so that the beard smoothly into the net hole. If you move with the beard, it will overwhelm the beard, which is not conducive to the beard into the mesh.3, electric shaver should not shave long beard, so every 4 days or so shave a good. If the beard is very long, you should first use push shears or small scissors to cut the beard short, and then shave with an electric razor. If there is no push shears or small scissors, then you should use multiple times to split shaving method, first the fixed blade (mesh) and the beard into a vertical direction to touch the skin, shave the beard short some, and then according to the method of 2.4, with the push shear of the electric razor in use, should push the blade of the shear and face to maintain a vertical angle to push, in order to shave the beard.5, shaving once the phenomenon of stop rolling, the power should be turned off and restarted, to continue shaving after the motor rotation normal.6, electric shaver fixed blade is very thin, not forcibly pressurized to make it deformed or damaged.7, dry battery type electric shaver, after use or long-term shelving should be removed from the battery to avoid moisture leakage of the battery, causing unnecessary corrosion damage. AC electric shaver, after using the power should be cut off, pull out the plug to ensure safety. Rechargeable electric shaver can not make the power discharge too much, if the battery is insufficient should be charged first and then use, if long-term shelving without, should also be charged regularly (about three months).8, to regularly add a small amount of lubricant to the bearing parts to reduce wear and tear. Non-wet electric razor, do not use water or alcohol and other volatile chemicals to clean. Non-stainless steel material blade, if not used for a long time, should be wiped on the blade layer of thin oil to prevent rust damage to the blade.9, after each use of the razor, the application of small brushes to sweep away the dirt such as hair, shall not let the dirt set, otherwise there will be a motor jam or transmission blocked phenomenon. At the same time shavings and skin grease once cured on the blade, will affect the sharpness of the blade.
