NOTE:
1. M208-40Gbps Version:
Using the latest version of the USB4.0 interface, the transfer rate is up to 40Gbps, and the theoretical reading speed can reach 2800MB/s. The speed measured by the ORICO laboratory: the ssd enclosure read speed: 2800MB/s, write speed: 2100MB/s. Actual transfer speed depends on SSD speed, type of USB port, computer performance, NVMe media used, etc.
2. M207-20Gbps Version:
a. Please use the latest version of USB3.2 Gen2x2 interface, the transfer rate is up to 20Gbps, and the theoretical reading speed can reach 2000MB/s. The speed measured by the ORICO laboratory: With SAGSUNG 970 EVO PLUS SSD, Case reading speed: 1875.41 MB/s, Writing speed: 1874.02 MB/s.
b. To achieve the 20Gbps speed, please use USB3.2Gen2x2 interface. It is backward compatible with USB3.2 Gen1, USB3.1 Gen1 limited by the bandwidth of these interfaces, the speed is 10Gbps and 5Gbps respectively.
3. M206/FV09-10Gbps Version:
Using the latest version of the USB3.2 interface, the transfer rate is up to 10Gbps, and the theoretical reading speed can reach 1200MB/s. The speed measured by the ORICO laboratory: with SAGSUNG 970 EVO PLUS SSD, the ssd enclosure read speed: 1053MB/s, write speed: 1005MB/s. Actual transfer speed depends on SSD speed, type of USB port, computer performance, NVMe media used, etc.
4. M205-6Gbps Version:
Using the latest version of the USB3.2 interface, the transfer rate is up to 6Gbps, and the theoretical reading speed can reach 640MB/s. The speed measured by the ORICO laboratory, the ssd enclosure read speed: 551.78MB/s, write speed: 504.13MB/s. Actual transfer speed depends on SSD speed, type of USB port, computer performance, SATA media used, etc.
NOTE:
If your SSD is a brand new SSD hard drive:
Please format and partition the hard disk in Disk Management before using it for the first time. SSD is recommended to use exFAT format, compatible with Windows and Mac OS systems"
Open the case with the supplied screwdriver
Stick the thermal pad on the SSD, and then cover it with a heat dissipation vest.
Insert the rubber plug into the hole of the SSD, and then insert the SSD into the hard drive box interface.
Close the case and screw in the screws to complete the process.
M.2 NVMe 2280 SSD | Compatible SSD | 2280/60/42/30 NVMe |
USB 4.0 | Interface | Type-C |
40Gbps | Transfer rate | 20Gbps |
2-in-1 Cable | Including cable | 2-in-1 Cable |
Compatible with Samsung | 980/980 PRO/970 EVO Plus/970 EVO/970 Pro/960 Pro/960 EVO/860 EVO Series |
Compatible with WD | WD Blue SN550/WD Blue SN750/3D NAND/WD BLACK SN850/WD BLACK SN750 SE/WD BLACK SN750 Series |
Compatible with Kingston | A2000/KC2000/KC2500/SA400M8 |
Compatible with Seagate | BarraCuda 510/FireCuda 510/FireCuda 520 |
Compatible with Toshiba | RC500/RD500/RC100/RC10 |
Compatible with HP | EX950/EX900 Series |
Compatible with Intel | 600P/660P/665P/760P/545S/Optane 800P/Optane H10 |
Compatible with Crucial | P2/P5 Series |