Leadshine 86HSM85-BZ-E1 Servo Motors Kit+H2-758 Hybrid Servo Drivers+10m Cables CNC Engraving Milling Machine Motors Encoder
86HSM
Frame number :86
Holding torque :3.5~12N·m
Built-in 1000-line incremental photoelectric encoder
High output torque
The motor generates less heat and consumes less energy
Smooth operation, low vibration and noise
Fast response, suitable for frequent start and stop
Common Rating |
Specification |
||
Step angle |
1.8° |
Current/phase |
6.0 A |
Position accuracy |
1.8+0.09° |
Voltage |
3.8 V |
Dielectric strength |
1000VAC 1min |
DC Resistance/phase +10% |
0.63 Ω |
Insulation resistance |
100MOhm(500VDC) |
Inductance/phase+20% |
4 mH |
Insulation class |
B |
Holding torque |
8 N·M |
Temp rise(Max) |
80K |
Inertia |
2.5 kg·cm² |
Radial play |
Max.0.02mm(Load 450g) |
Weight |
3.5 kg |
Axial play |
Max.0.08mm(Load 900g) |
Encoder Resolution |
1000 cpr |
H2-758
Using a new 32-bit motor control DSP chip,
Adopting advanced vector closed-loop control technology; .
With trapezoidal wave test function;
Static current and dynamic current can be set arbitrarily (0-- 8A range);
Can drive 86 series hybrid servo motor;
Optically decoupled differential signal input;
Pulse response frequency 200KHZ;
Subdivision setting (within 200~51200);
With over current, over voltage and tracking error and other protection;
Six-digit digital tube display, easy to set parameters and monitor the running state of the motor