FTTH Tool Kit Optical Power Meter FC-6S Fiber Cleaver Scissor Order 2pc via DHL
Description:
Calibration Wavelegth(nm): 800~1700
Detector Type: InGaAs
Measurement Range(dBm): -70~+10
Uncertainty(dB): +0.2(5%)
Linearity(dB): 0.01
Display Resolution(dB): 0.03
Frequency ID Hz: 270 330 1K 2K
Wave ID nm: 850/980/1300/1310/1550/1625
Date Storage Capacity: 1000
Communication Port: USB
Connector: FC/SC/ST Interchangeable
Alkaline Battery: AA battery(Not include)
Power Adapter(V): 8.4
Battery Operating Time(h): 240 without backlight
Operation Temperature(℃): -10~+60
Storage Temperature(℃): -25~+70
Dimension(mm): 172 x 82 x 33
Weight(g): 310
Introduction:
1. Central wavelength:650nm±1nm
2. Emitter type: LD
3. Output power: 1mW
4. Optical connector: 2.5mm universal connector
5. CW frequency: 2Hz
6. Power supply: 2 x AA Alkaline batteries(Not Include)
7. Operating temperature: -10~+60℃
8. Storage temperature: -20~+70℃
9. Dimension: 168mm*27mm
FC-6S Fiber Cleaver
Features:
- Provides approximately 36,000 cleaves
- Compact body& light weight
- High Precision Cleaves
- 250um Coated or 900um Buffer fiber
- Singlemode or Multimode Use
- 12 Position Rotatable and Replicable Blade
Specifications:
Applicable fibers Singlemode or Multimode Use
Fiber Diameter 125um
Coating Diameter 250um ~ 900um
Typical Cleave Angle 0.5 Degrees
Cleave Length 9 - 16mm (Single Fiber - 0.25mm Coating)
10 - 16mm (Single Fiber - 0.9mm Coating)
Blade Life Time 36,000 cleaves (3,000 per blade position)
Cleaver Dimensions 63 x 65 x 63mm
Weight: 475
Fiber Optic Stripper CFS-2
Specifications:
For stripping 125 micron fiber with 250 micron buffer coating.
Features:
- 1.0mm diameter stripping hole at the tip of tool that can be used to strip the fiber jacket
- 140 μm diameter hole and V-opening in blade allows removal of 250 micron buffer coating from 125 micron fiber
- All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips
- Lock to hold tool closed when it is not in use
- Will not scratch or nick glass fiber
- Pre-set at the factory-no adjustments needed
- Comfort grip, ergonomic handles
Cable Striping Plier
Introduction:
For stripping 250 micron buffer coating to expose 125 micron cladded fiber
Second hole for stripping 2-3mm fiber jackets
125 μm diameter hole and V-opening in blade allows removal of 250 micron buffer coating from 125 micron fiber
Pre-set at the factory - no adjustments needed
Will not scratch or nick glass fiber
All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips
Comfort-grip, ergonomic handles
Lock to hold tool closed when it is not in use
Applicable to optical fiber diameter0.25-0.9
Size: 30mm(w)x110mm(D)x20mm(H)
Package Include:
1 x Power meter and 1 Mw Visual Fault Locator
1 x FC/ Universal 2.5mm adaptor
1 x SC Adapter
1 x Fiber cleaver FC-6S Fiber Cleaver
1 x Spare cleaver Blade
1 x Fiber Optic Stripper CFS-2
1 x Fiber Optic Stripping Tool Plier
1 x Fiber Optic Shears/scissor
1 x Cotton swabs bag
1 x Fixed-length Fiber optic wire stripping
1 x 50ML Hard Alcohol Bottle Container
 |  |
 |  |
 |  |
 |
