2x KIT REPAIR Dust Cover Hinge
BRAND AND TURNTABLE MODEL IN THE AD.TITLE.
MARCA E MODELLO GIRADISCHI NEL TITOLO INSERZIONE.
STAI COMPRANDO 2 KIT PER RIPARARE 2 CERNIERE.
YOU ARE BUYING 2 KITS TO REPAIR 2 HINGES.
NON STAI COMPRANDO LE CERNIERE COMPLETE !!!
YOU ARE NOT BUYING THE FULL HINGES!!!!
This
repair kits consists of TWO 3D printed hinge clip (the upper portion
only), TWO screws, TWO washers and TWO nuts, all black.
The hinge clip is an improved design putting more material in the area where the spring presses against it.
VERY STRONG ! SUPER RESIST ! SUPER RESISTENTI !
Installation:
The first step is to remove the spring pressure by unhooking the visible end of the spring.
Next
step is to separate the old broken hinge clip from the lower portion.
The flattened end of the existing hinge pin needs to be removed. Options
to do that include; file it, grind it, cutting wheel or metal saw (we
use a Dremel tool with cut-off wheel).
Once
the end of the existing hinge pin is removed - tap the pin out using a
narrow punch and a small hammer being careful that you don't lose the
spring as it comes apart. You will reuse the spring during reassembly.
Insert
the spring into the spring cavity in proper orientation with the lower
portion spring hook. Bring the hinge clip and the lower portion
together, aligning them in preparation of inserting the new black
screw.
Carefully insert the new black screw keeping the clip and lower portion in alignment.
Put a nut and re-hook the spring end under the lower portion spring hook. Finish.