Material: plastic Working current: 88mA Frequency: 433.92MHz, 315MHz (Optional) Modulation method: order (AM) Transmitting power: ≤100mW Suitable for: garage door opener remote control, gate door opener remote control, remote control alarm, etc. Nominal voltage: 12V 27A battery (included) Wireless transmission distance: 50-150m (open space) Quantity: 1pc, 2pcs (Optional) Chip types that support cloning: 2260 (pt2260, sc2260, lx2260, hx2260); 2262, (pt2262, sc2262, lx2262, hx2262, hx2262), pt2264, pt2240 (lx2240), 1527 (ev1527, hs1527, fp), fp527, fp, sm, smc926, ax5026 , AX5326-3, AX5326-4, ht600, ht680, ht6207, ht6010, ht6012, ht6013, ht6014, ht12d, pic16f629, pic16f630, etc. Different chip manufacturers have different chip prefixes because the digital part of the chip can be the same model. Note: We generally do not recommend copying the rolling code chip, because there are many uncertainties when copying the rolling code chip. When copying the rolling code chip remote control, it is impossible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the scroll code remote control. Steps for usage: 1. Clear the password: press the unlock button and the lock button with two fingers at the same time; the led light flashes 3 times quickly within about 2 seconds; release one finger (the other hand cannot be released), and then use the released Quickly click the release button with your finger 3 times until the LED light flashes quickly; both fingers can release; then press any button on the remote control; when the LED light is off, it means that the code is cleared successfully (all four keys are empty ); If the indicator light is still on after pressing any button on the remote control, it means that the original password has not been cancelled successfully. You need to clean up again. Only by successfully cleaning up the code can you clone successfully. You can clean and clone the code repeatedly. 2. Copy: Take the original remote control in the left hand and the cloned remote control in the right hand, and keep the two remote controls as close as possible. Press the first button of the two remote controls at the same time; within about 2 seconds, the LED light will flash 2 times quickly; after one second, the indicator light will continue to flash and release your finger; after successful learning, press this button, The indicator light will stay on, which means that the first key control code on the original remote control has been copied to another remote control; you can use the same method to turn on the second key, the third key... if copied If successful, the remote control function is the same as the corresponding original remote control. 3. Restore: When you accidentally erase the copy of the remote control code, you can press the two keys at the bottom of the remote control copy at the same time, the led light will flash quickly, press any key and release it, and it will stay on. The code has been restored. Before using our remote copy control, please make sure to delete the existing code from the remote control. 4. How to deal with the situation that some keys can be controlled, but others cannot be controlled? You can use clear and reset operations as follows: The first clear code; After the compensation code, copy the failed key again without copying the remaining buttons; Then clear the code again; Recovery code; at this time, the new code will overwrite the original key that was not successfully copied, and will now retain the original key that was successfully copied. If there is no copy after the second key copy, please repeat the above steps again and again until all keys are successfully copied. Precaution: 1. Prerequisites for selecting the remote control: the original remote control function is normal, the remote control chip is the same or compatible, and the operating frequency of the remote control is the same. 2. The remote control can only copy fixed codes, learning code chips and some single-chip remote controls (for copying chip models, please refer to the copyable chip types). 3. Two-way remote control, rolling code remote control, remote control MCU encryption program cannot be copied. For example, hcs200, hcs201, hcs300, hcs301, etc. 4. Before copying the remote control, please make sure that the code on the remote control has been cancelled, and confirm that the code has been cancelled successfully. Otherwise, it will not be able to copy. 5. Make sure your remote has enough power, the distance between the two remotes is better! If the copy distance is too close, the switch will copy at a different angle. Press and hold the button on the original remote control to make the signal completely normal, then press the button on the remote control to make sure that the function is fully copied Note: 1. There may be slight size deviations due to manual measurement, different measuring methods and tools. 2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
Feature:
Multifunctional, multivariable, personalized and easy-to-use design.
This smart remote control duplicator is suitable for electric door remote control, retractable door remote control, garage door remote control.
Specification:
Material: plastic
Working current: 88mA
Frequency: 433.92MHz, 315MHz (Optional)
Modulation method: order (AM)
Transmitting power: ≤100mW
Suitable for: garage door opener remote control, gate door opener remote control, remote control alarm, etc.
Nominal voltage: 12V 27A battery (included)
Wireless transmission distance: 50-150m (open space)
Quantity: 1pc, 2pcs (Optional)
Chip types that support cloning:
2260 (pt2260, sc2260, lx2260, hx2260); 2262, (pt2262, sc2262, lx2262, hx2262, hx2262), pt2264, pt2240 (lx2240), 1527 (ev1527, hs1527, fp), fp527, fp, sm, smc926, ax5026 , AX5326-3, AX5326-4, ht600, ht680, ht6207, ht6010, ht6012, ht6013, ht6014, ht12d, pic16f629, pic16f630, etc.
Different chip manufacturers have different chip prefixes because the digital part of the chip can be the same model.
Note: We generally do not recommend copying the rolling code chip, because there are many uncertainties when copying the rolling code chip. When copying the rolling code chip remote control, it is impossible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the scroll code remote control.
Steps for usage:
1. Clear the password: press the unlock button and the lock button with two fingers at the same time; the led light flashes 3 times quickly within about 2 seconds; release one finger (the other hand cannot be released), and then use the released Quickly click the release button with your finger 3 times until the LED light flashes quickly; both fingers can release; then press any button on the remote control; when the LED light is off, it means that the code is cleared successfully (all four keys are empty ); If the indicator light is still on after pressing any button on the remote control, it means that the original password has not been cancelled successfully. You need to clean up again. Only by successfully cleaning up the code can you clone successfully. You can clean and clone the code repeatedly.
2. Copy: Take the original remote control in the left hand and the cloned remote control in the right hand, and keep the two remote controls as close as possible. Press the first button of the two remote controls at the same time; within about 2 seconds, the LED light will flash 2 times quickly; after one second, the indicator light will continue to flash and release your finger; after successful learning, press this button, The indicator light will stay on, which means that the first key control code on the original remote control has been copied to another remote control; you can use the same method to turn on the second key, the third key... if copied If successful, the remote control function is the same as the corresponding original remote control.
3. Restore: When you accidentally erase the copy of the remote control code, you can press the two keys at the bottom of the remote control copy at the same time, the led light will flash quickly, press any key and release it, and it will stay on. The code has been restored. Before using our remote copy control, please make sure to delete the existing code from the remote control.
4. How to deal with the situation that some keys can be controlled, but others cannot be controlled? You can use clear and reset operations as follows:
The first clear code;
After the compensation code, copy the failed key again without copying the remaining buttons;
Then clear the code again;
Recovery code; at this time, the new code will overwrite the original key that was not successfully copied, and will now retain the original key that was successfully copied. If there is no copy after the second key copy, please repeat the above steps again and again until all keys are successfully copied.
Precaution:
1. Prerequisites for selecting the remote control: the original remote control function is normal, the remote control chip is the same or compatible, and the operating frequency of the remote control is the same.
2. The remote control can only copy fixed codes, learning code chips and some single-chip remote controls (for copying chip models, please refer to the copyable chip types).
3. Two-way remote control, rolling code remote control, remote control MCU encryption program cannot be copied. For example, hcs200, hcs201, hcs300, hcs301, etc.
4. Before copying the remote control, please make sure that the code on the remote control has been cancelled, and confirm that the code has been cancelled successfully. Otherwise, it will not be able to copy.
5. Make sure your remote has enough power, the distance between the two remotes is better! If the copy distance is too close, the switch will copy at a different angle. Press and hold the button on the original remote control to make the signal completely normal, then press the button on the remote control to make sure that the function is fully copied
Note:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
10pcs Feature:
10pcs Multifunctional, multivariable, personalized and easy-to-use design.
10pcs This smart remote control duplicator is suitable for electric door remote control, retractable door remote control, garage door remote control.
10pcs Specification:
10pcs Material: plastic
10pcs Working current: 88mA
10pcs Frequency: 433.92MHz, 315MHz (Optional)
10pcs Modulation method: order (AM)
10pcs Transmitting power: ≤100mW
10pcs Suitable for: garage door opener remote control, gate door opener remote control, remote control alarm, etc.
10pcs Nominal voltage: 12V 27A battery (included)
10pcs Wireless transmission distance: 50-150m (open space)
10pcs Quantity: 1pc, 2pcs (Optional)
10pcs Chip types that support cloning:
10pcs 2260 (pt2260, sc2260, lx2260, hx2260); 2262, (pt2262, sc2262, lx2262, hx2262, hx2262), pt2264, pt2240 (lx2240), 1527 (ev1527, hs1527, fp), fp527, fp, sm, smc926, ax5026 , AX5326-3, AX5326-4, ht600, ht680, ht6207, ht6010, ht6012, ht6013, ht6014, ht12d, pic16f629, pic16f630, etc.
10pcs Different chip manufacturers have different chip prefixes because the digital part of the chip can be the same model.
10pcs Note: We generally do not recommend copying the rolling code chip, because there are many uncertainties when copying the rolling code chip. When copying the rolling code chip remote control, it is impossible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the scroll code remote control.
10pcs Steps for usage:
10pcs 1. Clear the password: press the unlock button and the lock button with two fingers at the same time; the led light flashes 3 times quickly within about 2 seconds; release one finger (the other hand cannot be released), and then use the released Quickly click the release button with your finger 3 times until the LED light flashes quickly; both fingers can release; then press any button on the remote control; when the LED light is off, it means that the code is cleared successfully (all four keys are empty ); If the indicator light is still on after pressing any button on the remote control, it means that the original password has not been cancelled successfully. You need to clean up again. Only by successfully cleaning up the code can you clone successfully. You can clean and clone the code repeatedly.
10pcs 2. Copy: Take the original remote control in the left hand and the cloned remote control in the right hand, and keep the two remote controls as close as possible. Press the first button of the two remote controls at the same time; within about 2 seconds, the LED light will flash 2 times quickly; after one second, the indicator light will continue to flash and release your finger; after successful learning, press this button, The indicator light will stay on, which means that the first key control code on the original remote control has been copied to another remote control; you can use the same method to turn on the second key, the third key... if copied If successful, the remote control function is the same as the corresponding original remote control.
10pcs 3. Restore: When you accidentally erase the copy of the remote control code, you can press the two keys at the bottom of the remote control copy at the same time, the led light will flash quickly, press any key and release it, and it will stay on. The code has been restored. Before using our remote copy control, please make sure to delete the existing code from the remote control.
10pcs 4. How to deal with the situation that some keys can be controlled, but others cannot be controlled? You can use clear and reset operations as follows:
10pcs The first clear code;
10pcs After the compensation code, copy the failed key again without copying the remaining buttons;
10pcs Then clear the code again;
10pcs Recovery code; at this time, the new code will overwrite the original key that was not successfully copied, and will now retain the original key that was successfully copied. If there is no copy after the second key copy, please repeat the above steps again and again until all keys are successfully copied.
10pcs Precaution:
10pcs 1. Prerequisites for selecting the remote control: the original remote control function is normal, the remote control chip is the same or compatible, and the operating frequency of the remote control is the same.
10pcs 2. The remote control can only copy fixed codes, learning code chips and some single-chip remote controls (for copying chip models, please refer to the copyable chip types).
10pcs 3. Two-way remote control, rolling code remote control, remote control MCU encryption program cannot be copied. For example, hcs200, hcs201, hcs300, hcs301, etc.
10pcs 4. Before copying the remote control, please make sure that the code on the remote control has been cancelled, and confirm that the code has been cancelled successfully. Otherwise, it will not be able to copy.
10pcs 5. Make sure your remote has enough power, the distance between the two remotes is better! If the copy distance is too close, the switch will copy at a different angle. Press and hold the button on the original remote control to make the signal completely normal, then press the button on the remote control to make sure that the function is fully copied
10pcs Note:
10pcs 1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
10pcs 2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
-
* We accept PayPal only.
-
* All major credit cards are accepted through secure payment processor PayPal.
-
* Payment must be received within 7 business days of auction closing.
-
* If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
-
* Refunds are normally issued with 2 working days.If you need any further information regarding payments,please contact us via eBay message.
* If you have any special requests, please send us a message before making the payment. -
*NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding buying.
-
* 12 months Warranty. Buy with confidence!
-
* If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact me before you return it.
-
* If item is defective in 3 months, We will send you a replacement without extra charger, or offer refund after we receive the defective item.
-
* If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.
-
* We ship from the item location.
-
* Items will be shipped within 3 business day(S) after payment completed received.
-
* NOTE: Please check the parcel before sign for it, If any problem with the parcel please mark on the signature that "Damaged when received" when signing it. Thank you.
-
* We are not responsible for any custom duty or import tax.
-
* We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receive it.
-
* All messages will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible.
-
* Serious Buyer Only! Please place bid only if you agree with all the terms.
-
* If you have any problems or concerns whatever with your order or products, please message us and give us a chance to assist you before you leave any feedback. We believe we can produce a positive outcome to any situation and will work hard to earn your praise.
-
* If you were pleased with this transaction, Please give us 5 star rating, thanks!
-
* Our office hours are 9:00 a.m to 6:00 p.m (GMT +8) of Monday to Saturday.
-
* And our Office is closed on Sunday and public holidays.
-
* We apologize for the late reply during the holidays.