SATA To IDE HDD Converter Adapter Serial To Parallel IDE To SATA CD SSD Riser Card with 7-pin SATA Data Cable and IDE Power Cable for Laptop Desktops
Feature:
1. IDE to SATA Two-way HDD adapter: This IDE to SATA Two-way HDD adapter card allows you to convert between IDE and SATA, making it easy to use different types of hard drives and devices.
2. Simple installation process: The installation process of hard drive converter is straightforward and requires only a few simple steps. Ensure that your computer is turned off before beginning, and follow the instructions carefully.
3.Easy conversion from SATA to IDE: A. Shut down the computer before operation; B. Open the computer case, insert the riser card into the ide interface of the motherboard; C. Connect one end of the sata data cable to the sata interface of the riser card, and the other end to On the sata interface of the hard disk; D. Set the switch and jumper according to the instructions on the riser card label; E. Connect the power cable of the equipped riser card (note that the direction cannot be reversed). At the same time, plug in the power cord of the sata hard disk. After the computer is connected, the computer can correctly identify the connected sata device and it can be used normally.
4.Simple conversion from IDE to SATA: A. Shut down the computer before operation; B. Open the computer case, insert one end of the sata data cable into the sata interface on the motherboard, and connect the other end to the sata interface of the adapter card; C. The jumper is on the side of the optical drive The above European instructions need to be set as the main board: Master; D. Insert your ide hard disk into the ide interface of the adapter card (pay attention to the front and back of the card to avoid wrong insertion), the ide interface interface of the adapter card has anti-reverse The raised design of the plug can be inserted in the center. At the same time, your ide hard disk needs to be the main disk; E. Connect the power cable of the adapter card (note that the direction cannot be reversed) and plug in the power cable of the ide hard disk at the same time. The host computer correctly recognizes the connected ide hard disk, and it can be used normally.
5. Compatible with various operating systems: This SATA to IDE Two-way SSD riser card is compatible with a wide range of operating systems, making it versatile and convenient to use.

 

Specification:
Model Number: SATA to IDE Two-way Adapter Card
Name: SATA to IDE Two-way Adapter Card
Product size: About 5.2x4.6x4.1cm/2.04x1.81x1.61in
Color (optional): black, red
Main control IC: JM20330
System support: Windows

Points to note:
1. When the IDE hard disk is transferred to the sata motherboard, the jumper of the hard disk needs to be set as the main disk.
2. The riser card needs an external power supply to work normally.
3. You need to turn off the computer when connecting the riser card.

Note:
1. It needs to be installed in a power-off state, and hot swapping is not supported.
2. Due to different product batches, the color or appearance of the accessories may be slightly different from the link picture and the previous batches, which will not affect the use, please do not take photos if you mind.
3. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
4. Please allow 1-2cm measuring deviation due to manual measurement.