SR602 Mini Motion Sensor Detector Module with Lens Pyroelectric Infrared PIR Kit Sensory Switch High Sensitivity for Arduino DIY
Features:
1.Adjustable Trigger Time: Customize the output high level time of this micro SR602 mini motion sensor detector module from 2.5 seconds to 1 hour, allowing flexible control over activation duration.
2.Fixed Blocking Time: This mini infrared sensing module with a set blocking time of 2 seconds, ensure reliable and consistent performance when detecting human presence.
3.Non-Adjustable Repeatable Trigger: This pyroelectric infrared pir kit sensory switch is factory-defined as repeatable trigger mode, ensuring it can be triggered multiple times within the specified interval for continuous monitoring.
4.Wide Voltage Compatibility: Designed to operate with a power supply voltage range of 3.3V to 15V, this pyroelectric infrared sensory switch offers flexibility and compatibility with various power sources, with limits ranging from 2.8V to 18V.
5.Precise Timing Sequence: Upon power-up, the infrared human body infrared motion module initially outputs a high level for 2 seconds, then transitions to a low level, entering standby mode. Adjusting the delay time will correspondingly increase the high-level output period after powering up, indicating the delay in transitioning to normal operating mode.

 

Specification:
Origin: Mainland China
Type: Module
Condition: New
Model: SR-602
Sensing Distance: Up To 5 Meters; Recommended 0-3.5m
Output: High Level, H=3.3V, L=0V
Power Supply Dc: 3.3V-15V
Quiescent Current: 20uA
Product Size: 20.00x16.00x16.00mm/0.78*0.62*0.62in (Including Pins)
1. Output high level time of this product is adjustable, 2.5 seconds to 1 hour, the output time is set at 2.5 seconds at the factory, need to change, you can change a chip resistor.
2. Blocking time, 2 seconds, not adjustable.
3. Factory defined as repeatable trigger, not changeable.
4. The power supply voltage of this module is 3.3V~15V, and the limiting voltage is 2.8V~18V.
5. The output timing of the module is: output high level for 2 seconds after power on, then turn low level and enter standby state.
If the delay time is changed, the time of outputting high level after power-on of the module will be increased accordingly, which can be understood as the start-up time will be increased after entering the normal working state after power-on.
6. After installing the photosensitive element, it does not work during the day, and works at night, without the photosensitive element, it works all day (no photosensitive element is installed by default)
7. This module is very sensitive, pay attention to the installation location, try to avoid heat radiation source (air vents / direct sunlight)

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.