【High Precision Automotive Multimeter】Measure DC Amperage to 20A, AC DC Volt to 750V~1000V, Ohm Range from 200Ω to 200MΩ, Temp range from -4~1800℉, 3/4/5/6/8 Cylinder Switchable, 0.1ms~10.0 ms pules width, 000~10000RPM Tachometer and Dwell Angle Test.
【Multi-function Multimeter】Data Hold,NCV function,Auto Backlight,Auto Power Off,Diode Test,hFE test,Continuity Buzzer,Temperature Measuring,Auto Backlight makes it convenient for troubleshoot car engine battery and electric problems in dim place.
【NCV Sensitive Detection】Press the button of NCV of the voltage meter and close to the lead being measured,buzzer will alarm,in order to make sure circuits were alive in the house.Safely and Accurately to check household electrical problems.
【Measure Safety】Confirm to the security requirements of 600V CAT IV 1000V CAT III , another protective rubber sleeve around the Ohmmeter,and the fuses can protect the multimeter effectively too, which gives you double protection and provide you the HIGHEST SECURITY during the working.
【What You Will Get？】1* HP-770J Automotive Multimeter，2*Test Leads,1* Thermocouple ,1*English Manual,1*Small Screwdriver
Product Specification:
| DC Voltage | Range | Accuracy | Resolution |
| 200mV | ±(0.5% of rdg + 8digits) | 100μV | |
| 2V | 1mV | ||
| 20V | 10mV | ||
| 200V | 100mV | ||
| 1000V | ±(1.5% of rdg + 8 digits) | 1V | |
| AC Voltage | Range | Accuracy | Resolution |
| 200mV | ±(2.0% of rdg + 10 digits) | 100μV | |
| 2V | ±(1.5% of rdg + 10 digits) | 1mV | |
| 20V | 10mV | ||
| 200V | 100mV | ||
| 750V | ±(2.5% of rdg + 10 digits) | 1V | |
| Resistance | Range | Accuracy | Resolution |
| 200Ω | ±(1.2% of rdg +15 digits) | 100mΩ | |
| 20kΩ | ±(0.8% of rdg +8 digits) | 10Ω | |
| 200kΩ | 100Ω | ||
| 20MΩ | ±(2.5% of rdg + 15 digits) | 10kΩ | |
| 200MΩ | ±【5.0% of （rdg-10）+30 digits】 | 1 kΩ | |
| DC Current | Range | Accuracy | Resolution |
| 20A | ±(2.0% of rdg + 10 digits) | 10mA | |
| Temperature (K type) | Range | Accuracy | Resolution |
| (-20～1000)℃ | ±(3%of rdg +2 digits)＜400℃ | 1℃ | |
| ±(3.5%of rdg +5 digits)≥400℃ | |||
| (-4～1800)℉ | ±(3%of rdg+2 digits)＜750℉ | ℉ | |
| ±(3.5%of rdg +5 digits)≥750℉ | |||
| Tachometer (Rotate Speed) | 500-10000RPM | ±(1.5%of rdg＋8 digits) | - |
| Dwell : | 0 - 120.0° | ±(1.5%of rdg＋8 digits) | 3 CYL |
| 0 - 90.0° | 4 CYL | ||
| 0 - 72.0° | 5 CYL | ||
| 0 - 60.0° | 6 CYL | ||
| 0 - 45.0° | 8 CYL |
More Functions:
- NCV
- Data Hold
- Diode Test
- Auto Shut Down
- Auto Backlit Display
- Continuity W/ Buzzer
- LED Dial Indicator Light
- Manual Range Switchable
- Switchable Celsius/Fahrenheit temperature
Tachometer measurement
1) Connect the black test lead to “COM” socket and red test leads to the “VΩ T+ ” socket.
2) Set the selector switch to the “TACH×10” position for 3CYL, 4CYL, 5CYL, 6CYL, 8CYL, according to the engine cylinders. For any TACH signal with a given
frequency, in convention ignition system: RPM=120×freq ÷ CYL. in DIS ignition system : RPM=120×freq ÷ 2
3) Connect the red test probe to “BREAKER POINTS” or “-” terminal of IGNITION COIL, and connect the black test probe to “GROUND ” or “ - ” terminal of battery
4) Start the engine and read engine RPM, multiply the displayed reading by ten to get actual RPM.
NCV Sensitive Detection
Full-scale overload protection, if let the top of the instrument close to the conductor, when the live voltage ≥ 90V AC rms, the NCV red LED light and green LED light will light up alternately together with buzzer sound.
Data Hold & Backlight Display
Data hold and backlight buttons on the clamp meter make it easy to take readings while you operate. With the backlight display to read and record easily under dark areas.
1 x Test Leads
1 x Temperature Probe
1 x Carrying Case
1 x Manual
