LED PIR Human Body Motion Sensor Strip Light Flexible Waterproof Lamp Tape 2 Modes Light for Kitchen Cabinet Closet Outdoor
Advantage:
1. Power saving and low heat generation.
2. Good color consistency and large light-emitting angle (120°).
3. Good flexibility, can be bent at will without breaking, and can be bent into various shapes (not at right angles).
4. The color is pure, soft and gorgeous, and various colors can be customized or changed as required.
5. Long life span, with an average life span of 50,000 hours, free of maintenance.
6. The product is light and thin, suitable for installation in a narrow space.
7. There is double-sided tape on the back of the LED light strip, convenient for installation and modeling.
8. Low voltage (DC12V power supply), which can ensure personal safety during use.
9. Each LED is a group, and each group can be cut off at will. It will not affect the normal use of other groups, convenient for installation and will not cause waste.

Specification:
Power material: ABS
Light strip material: silicone
Size: 0.5m/1.64ft, 1m/3.28ft, 2m/6.56ft, 3m/9.84ft, 4m/13.12ft, 5m/16.4ft
Product weight: 0.5m: 110g, 1m: 120g, 2m: 130g, 3m: 140g, 4m: 150g, 5m: 160g,
Lamp beads model: 2835 lamp beads
Plug: EU; US;
Number of lamp beads: 1m-60LED
Waterproof rating: IP65 epoxy waterproof
Sensing distance: 3-5 meters(9.84-16.4ft)
Induction time can be adjusted: 10s (15 seconds)-5m (5 minutes), can be adjusted as needed
Working mode: no lights during the day, lights on at night when people come, lights off within 10 seconds-5 minutes after people walk, and someone keeps on all the time.

Function mode:
Light control + human body induction
1. Light control sensor: It is standby function during the day and when the surrounding brightness is high, and it will not work automatically. At night or when the surrounding brightness is low, and when the sensor head is blocked by hand, it is equivalent to the night. Will automatically start working mode

2. Human body infrared sensor: This product allows consumers to set the sensor time at night. During work, the product will automatically turn on the light when the human body is sensed under the condition of self-adjusting the sensor time. The adjusted time is 10 seconds to 5 minutes, and the lights are off when people go. , It will switch to standby function without sensing the human body again.

Scope of Application
1. Home decoration (stairway lighting, hall aisle lighting, lighting decoration, edge trimming decoration);
2. Path indication and exterior wall contour decoration, billboard backlighting, advertising signs, channel signal signs, etc.;
3. Buildings, buildings, pavilions, bridges, park squares and other outlines, building lighting decoration, various indoor and outdoor lighting projects;
4. Application of decorative lighting for holiday decoration, event venue setting, exhibition venue decoration, exhibition hall decoration, showcase, showcase, props, etc.;

Note:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-2cm measuring deviation due to manual measurement.