If you have any questions, please contact customer service first, do not open disputes easily, thank you!
Feature:
The reinforced U-shaped fixed plate can be used for a yoga hammock, suspended training belt, sandbag, hanging seat, etc.
Simple installation, suitable for home and gym.
Strong endurance, high hardness and long life.
Specification:
Name: Two-hole fixing plate/Four-hole fixing plate
Specification: with expansion screw/self-tapping screw/four holes + expansion screw
Single gross weight: about 0.64kg
Maximum load: about 500kg
Color: gray
Types: two holes and four holes
Product size: about 12*6cm
Installation steps:
1. Put the fixed plate on the ceiling or wall that needs to be punched, mark the position where the hole is needed, and determine the position of the hole.
2. Prepare electric drills and drill bits. Since the fixed plate is equipped with M10x90 expansion screws, you need to use M14 drill bits to make holes.
3. After the hole is punched, insert the expansion screw into the punched hole.
4. Put the fixing plate on the exposed upper end of the expansion screw, screw on the screw, and tighten the screw to complete the installation.
Product List:
Fixed plate *1
Screws * 4
Note:
1. All images are professionally calibrated, but due to ambient light and different display device settings, the images and items you see may have some deviations, please forgive me.
2. The data is manually measured, there may be some deviations, but it does not affect the use.
The reinforced U-shaped fixed plate can be used for a yoga hammock, suspended training belt, sandbag, hanging seat, etc.
Simple installation, suitable for home and gym.
Strong endurance, high hardness and long life.
Specification:
Name: Two-hole fixing plate/Four-hole fixing plate
Specification: with expansion screw/self-tapping screw/four holes + expansion screw
Single gross weight: about 0.64kg
Maximum load: about 500kg
Color: gray
Types: two holes and four holes
Product size: about 12*6cm
Installation steps:
1. Put the fixed plate on the ceiling or wall that needs to be punched, mark the position where the hole is needed, and determine the position of the hole.
2. Prepare electric drills and drill bits. Since the fixed plate is equipped with M10x90 expansion screws, you need to use M14 drill bits to make holes.
3. After the hole is punched, insert the expansion screw into the punched hole.
4. Put the fixing plate on the exposed upper end of the expansion screw, screw on the screw, and tighten the screw to complete the installation.
Product List:
Fixed plate *1
Screws * 4
Note:
1. All images are professionally calibrated, but due to ambient light and different display device settings, the images and items you see may have some deviations, please forgive me.
2. The data is manually measured, there may be some deviations, but it does not affect the use.
