T-7 Red Hawk Silhouette Metal Wall Art, Airplane Silhouette Wall Decor, Metal Aircraft Wall Art, Aviation Wall Decor, Plane

The Boeing–Saab T-7 Red Hawk,[2] initially known as the Boeing T-X (later Boeing–Saab T-X),[3][4] is an American/Swedish supersonic advanced jet trainer produced by Boeing with Saab. In September 2018, the United States Air Force (USAF) picked it for the T-X program to replace the Northrop T-38 Talon as the service's advanced jet trainer. Development The USAF's Air Education and Training Command (AETC) began developing the requirements for a replacement for the supersonic Northrop T-38 Talon as early as 2003. Originally, the replacement trainer was expected to enter service around 2020. A fatigue failure of a T-38C killed its two-person crew in 2008 and the USAF advanced the target date of initial operational capability (IOC) to 2017.[5] In the fiscal 2013 budget proposal, the USAF suggested delaying the initial operating capability to FY2020 with the contract award not expected before FY2016.[6] Shrinking budgets and higher-priority modernization projects pushed the IOC of the T-X program winner to "fiscal year 2023 or 2024". Although the program was left out of the FY 2014 budget entirely, the service still viewed the trainer as a priority.[7] Boeing teamed up with Swedish aerospace firm Saab to compete for the T-7 program. On 13 September 2016,[8] the team unveiled prototypes of the Boeing T-X, a single-engine advanced jet trainer with a twin tail, tandem seating, and retractable tricycle landing gear, all powered by a General Electric F404 afterburning turbofan engine.[9][10] The first T-X aircraft flew on 20 December 2016.[11][12] The Boeing-Saab team submitted their entry after the Air Force opened the T-7 program to bids in December 2016.[13] In September 2018, Air Force officials announced that Boeing's design would be its new advanced jet trainer, under an up-to-US$9.2 billion (~$10.6 billion in 2022) program that would purchase 351 aircraft, 46 simulators, maintenance training and support. This contract has options for up to 475 airplanes in total.[14][15][16][17] In 2018, Boeing recorded a $691 (~$797.00 in 2022)-million pre-tax charge during the third quarter, in part because of the T-X program.[18] A U.S. Air Force publicity image of the T-7A Red Hawk showing Red Tail livery In May 2019, Saab announced that it would open a U.S. manufacturing facility for the T-X in Indiana with Purdue University.[19][20] In September 2019, the USAF named the aircraft the "T-7A Red Hawk" as a tribute to the Tuskegee Airmen, who painted their airplanes' tails red, and to the Curtiss P-40 Warhawk, an aircraft flown by the 99th Fighter Squadron, the U.S. Army Air Force's first black fighter squadron.[21][22] The aircraft entered series production in February 2021.[23] In April 2021, Saab Group delivered one aft section of T-7A aircraft to the Boeing St. Louis plant. In July 2021, Saab had delivered the second aft section to the Boeing St. Louis plant. Boeing will splice Saab's aft section with the front section, fins, wings and tail assembly to become a complete test aircraft for use in the EMD's flight test program.[24] On completion of the Engineering and Manufacturing Development (EMD) phase, Saab's brand new facility in West Lafayette, Indiana will serve as the manufacturing hub for the T-7A Red Hawk’s aft section and sub-systems such as hydraulics, fuel systems and secondary power.[24] Saab has developed new software for the T-7 to help provide for cheaper and faster development. The T-7A employed digital engineering that went from development to the first test flight within 36 months.[25] The T-7A has an advanced and digitized production line that takes only 30 minutes to splice the aft section with the wings.[26] The digital build process allows technicians to build the aircraft with minimal tooling and drilling during the assembly process.[27] The first production T-7 was rolled out on 28 April 2022.[28] Boeing intends to offer an armed version of the T-7 to replace aging Northrop F-5 and Dassault/Dornier Alpha Jet fleets around the world.[29] In May 2023, the Government Accountability Office released a report on the T-7 program detailing problems with the software and safety systems and other delays that saw the USAF delay a production decision to February 2025.[inconsistent] The report said that a schedule provided by Boeing in January 2023 was optimistic and dependent on favorable assumptions. Notwithstanding the delayed production decision, the report noted that Boeing still planned to start producing the first T-7s in early 2024.[30][31] The first T-7A Red Hawk flies over Edwards Air Force Base in November 2023 In June 2023, the first flight of the T-7A production aircraft was conducted from St. Louis Lambert International Airport, by Major Bryce Turner, a test pilot with the 416th Flight Test Squadron at Edwards Air Force Base, California, and Steve Schmidt, Boeing’s chief T-7 test pilot.[32][33] On 21 September 2023, the first Red Hawk was shipped to the US Air Force.[34] By November 2023, the USAF was actively considering the possibility of turning the T-7 into an armed combat aircraft. Conceptually dubbed the F-7, such a jet could provide roughly the same capability as a fourth-generation fighter which could maintain force numbers as F-16s are retired, and could replace older Northrop F-5 and Dornier Alpha Jet platforms on the export market.[35] The Red Hawk was deployed at Edwards Air Force Base for testing.[36] Design The T-7's design allows for future missions to be added, such as the aggressor and light attack/fighter roles.[37] In the training environment, it has been specifically designed for high-G and high angle-of-attack maneuvers and night operations, with an emphasis on being easily maintained. The aircraft is equipped with a single GE F404 turbofan engine, but produces three times the total thrust as the twinjet T-38.[38]

T-7 Red Hawk Silhouette Metal Wall Art, Airplane Silhouette Wall Decor, Metal Aircraft Wall Art, Aviation Wall Decor, Plane

The Boeing–Saab T-7 Red Hawk,[2] initially known as the Boeing T-X (later Boeing–Saab T-X),[3][4] is an American/Swedish supersonic advanced jet trainer produced by Boeing with Saab. In September 2018, the United States Air Force (USAF) picked it for the T-X program to replace the Northrop T-38 Talon as the service's advanced jet trainer.

Development
The USAF's Air Education and Training Command (AETC) began developing the requirements for a replacement for the supersonic Northrop T-38 Talon as early as 2003. Originally, the replacement trainer was expected to enter service around 2020. A fatigue failure of a T-38C killed its two-person crew in 2008 and the USAF advanced the target date of initial operational capability (IOC) to 2017.[5] In the fiscal 2013 budget proposal, the USAF suggested delaying the initial operating capability to FY2020 with the contract award not expected before FY2016.[6] Shrinking budgets and higher-priority modernization projects pushed the IOC of the T-X program winner to "fiscal year 2023 or 2024". Although the program was left out of the FY 2014 budget entirely, the service still viewed the trainer as a priority.[7]

Boeing teamed up with Swedish aerospace firm Saab to compete for the T-7 program. On 13 September 2016,[8] the team unveiled prototypes of the Boeing T-X, a single-engine advanced jet trainer with a twin tail, tandem seating, and retractable tricycle landing gear, all powered by a General Electric F404 afterburning turbofan engine.[9][10] The first T-X aircraft flew on 20 December 2016.[11][12] The Boeing-Saab team submitted their entry after the Air Force opened the T-7 program to bids in December 2016.[13]

In September 2018, Air Force officials announced that Boeing's design would be its new advanced jet trainer, under an up-to-US$9.2 billion (~$10.6 billion in 2022) program that would purchase 351 aircraft, 46 simulators, maintenance training and support. This contract has options for up to 475 airplanes in total.[14][15][16][17] In 2018, Boeing recorded a $691 (~$797.00 in 2022)-million pre-tax charge during the third quarter, in part because of the T-X program.[18]

A U.S. Air Force publicity image of the T-7A Red Hawk showing Red Tail livery
In May 2019, Saab announced that it would open a U.S. manufacturing facility for the T-X in Indiana with Purdue University.[19][20]

In September 2019, the USAF named the aircraft the "T-7A Red Hawk" as a tribute to the Tuskegee Airmen, who painted their airplanes' tails red, and to the Curtiss P-40 Warhawk, an aircraft flown by the 99th Fighter Squadron, the U.S. Army Air Force's first black fighter squadron.[21][22]

The aircraft entered series production in February 2021.[23] In April 2021, Saab Group delivered one aft section of T-7A aircraft to the Boeing St. Louis plant. In July 2021, Saab had delivered the second aft section to the Boeing St. Louis plant. Boeing will splice Saab's aft section with the front section, fins, wings and tail assembly to become a complete test aircraft for use in the EMD's flight test program.[24] On completion of the Engineering and Manufacturing Development (EMD) phase, Saab's brand new facility in West Lafayette, Indiana will serve as the manufacturing hub for the T-7A Red Hawk’s aft section and sub-systems such as hydraulics, fuel systems and secondary power.[24]

Saab has developed new software for the T-7 to help provide for cheaper and faster development. The T-7A employed digital engineering that went from development to the first test flight within 36 months.[25] The T-7A has an advanced and digitized production line that takes only 30 minutes to splice the aft section with the wings.[26] The digital build process allows technicians to build the aircraft with minimal tooling and drilling during the assembly process.[27]

The first production T-7 was rolled out on 28 April 2022.[28]

Boeing intends to offer an armed version of the T-7 to replace aging Northrop F-5 and Dassault/Dornier Alpha Jet fleets around the world.[29]

In May 2023, the Government Accountability Office released a report on the T-7 program detailing problems with the software and safety systems and other delays that saw the USAF delay a production decision to February 2025.[inconsistent] The report said that a schedule provided by Boeing in January 2023 was optimistic and dependent on favorable assumptions. Notwithstanding the delayed production decision, the report noted that Boeing still planned to start producing the first T-7s in early 2024.[30][31]

The first T-7A Red Hawk flies over Edwards Air Force Base in November 2023
In June 2023, the first flight of the T-7A production aircraft was conducted from St. Louis Lambert International Airport, by Major Bryce Turner, a test pilot with the 416th Flight Test Squadron at Edwards Air Force Base, California, and Steve Schmidt, Boeing’s chief T-7 test pilot.[32][33]

On 21 September 2023, the first Red Hawk was shipped to the US Air Force.[34]

By November 2023, the USAF was actively considering the possibility of turning the T-7 into an armed combat aircraft. Conceptually dubbed the F-7, such a jet could provide roughly the same capability as a fourth-generation fighter which could maintain force numbers as F-16s are retired, and could replace older Northrop F-5 and Dornier Alpha Jet platforms on the export market.[35] The Red Hawk was deployed at Edwards Air Force Base for testing.[36]

Design
The T-7's design allows for future missions to be added, such as the aggressor and light attack/fighter roles.[37] In the training environment, it has been specifically designed for high-G and high angle-of-attack maneuvers and night operations, with an emphasis on being easily maintained. The aircraft is equipped with a single GE F404 turbofan engine, but produces three times the total thrust as the twinjet T-38.[38]

×
×
×
×
×
×
×
×
×
×
×

Shipping info

Click the Shipping & Payments tab above the listing description for more info

Click the Shipping & Payments tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYMENT


Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Additional Information

No additional information at this time

Ask seller a question

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© Lazerdizayn

Click the Shipping & Payments tab above the listing description for more info

Accepted Payment Methods

Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Returns are accepted

Items must be returned within 30 days of the auction ending

Buyer will pay for return shipping.