User Manual
LOST TEMPO V2 Drum
& Looper Effect Pedal
Preface
Thank you for purchasing our Drum & Looper Effect Pedal. This is an
audio workstation that integrates multiple functional modules such as drum,
looper, tuner, etc., it will bring a richer expression to your performance and
practice! Here is the introduction of this practical and easy-to-operate effect
pedal.
Attentions
The power supply:
Please use 9V(+-10%) adapter (negative inside and positive outside),
otherwise it may cause equipment damage. Please unplug the power when not in
use or during thunderstorm weather.
The connection:
Be sure to turn off the power of related equipment before connecting or
disconnecting the device.
The electrical interference:
The electromagnetic wave of radio, television and other equipment may
cause interference to the use of equipment, so please try to stay away from
radio, television and other equipment.
The location:
To avoid deformation, discoloration, or other serious damage, do not
expose this unit to the following conditions:
a. Heat sources
b. Magnetic fields
c. Sunlight
d. High temperature
or moist district
e. Excessively dusty
or dirty locations
f. Strong vibrations or shocks
Features
1.Drum
l It contains 30
types of drums, support customizing drum, editing drum and saving drum by APP
in real time,etc.
l It contains
common types of rhythm,4/4,3/4,6/8, etc., which can be customized and edited.
l You can use the
TAP button to change the speed of DRUM,you also can use the left or right
button to fine-turning the value of speed.You can use Foots witch to play/stop
the DRUM,it's convenient and understand ability to operate.
2.Looper
l 4 loops can be
stored, the total recording time is up to 11 minutes.
l The recording
time of single loop is up to 5 minutes.
l Each loop support
unlimited overdub.
l Each loop can
undo and redo last layer audio unlimited times.
l Support using USB
cable to export/import WAV audio files from computer.
l One footswitch to
control all LOOP functions: record, play, stop, overdub, undo, redo, delete,
etc.
3.Tuner
l High precision
tuner.
l For note names
with sharp/flat signs, the system defaults only to use # (sharp sign) to
indicate.
Function Area Introduction
1.LOOP knob and LOOP indicator
l LOOP knob: Adjust
the playback volume of LOOP.
l LOOP indicator:
See Table 1 below.
2. DRUM knob and
DRUM indicator
l DRUM knob: Adjust
the DRUM volume.
l DRUM
indicator:Please look the introduction of DRUM indicator in following
"Function Module".
3. Left and right buttons
l Click the
left/right button to select drums, a total of 30 drums.
When the speed value is displayed on the display screen,you can use the
button to fine-tune the speed.But you can't fine-tune the speed if the LOOP
already have music, you can't fine-tune the speed when recording either.
l Hold the
left/right button to select a loop, a total of 4 loops.
l Click the left
and right buttons at the same time to turn on the Ready-record function, the
current LED will be flashing fast,and the LOOP recording will start
automatically after playing your instrument. Hold the left and right buttons at
the same time to enter the TUNER mode.
4. The TAP button
l lf the DRUM
indicator is off, you can click the TAP button to start the SYNC function.
Meanwhile, the speed value will be displayed on the display screen. After each
operation, the value will only be displayed for 5 seconds.SYNC function means
the drum is waiting to play with the loop synchronously.
l You can use the
TAP button to tapping the speed of DRUM,the speed value is displayed in real
time on the display screen,and the flashing speed of DRÜM-indicator corresponds
to the current speed value.
l When the drum
stopping, you can hold the TAP button to close the SYNC function and exit the
speed-displaying interface automatically.
l You can click the
TAP button to preview the drum speed value on the current LOOP.
5. The display screen
l When the LOOP
stopping, the number of DRUM type is displayed: d01-d30; sometime the speed
value 040-240 will be displayed on the display screen .
l In the state of
the LOOP playing, recording, and overdubbing, the progress of the LOOP will be
displaying, when the progress bar has gone a round, the audio has been played
once.
l In the TUNER
mode,show the note name.
6.4 LED
l In the LOOP
mode,4 LED represent 4 loops.
l Ready-Record
function off: LED of the current LOOP lighting up.
l Ready-Record
function on: LED of the current LOOP flashing fast.
l Ready to play the
next loop: the LED of the selected LOOP flashing slowly.
l In the TUNER
mode: show the pitch.
7.
LOOP footswitch:
Control the record, playback, stop, delete, overdub, undo, redo and
other functions of the LOOP.
8.
DRUM footswitch:
Click the footswitch to play/stop the DRUM, Click twice to stop the
LOOP and DRUM at the same time.
9.1/4”MONO audio input jack.
10.TYPE-C jack,support power supply and USB data transmission.
11.Earphone output jack.
12.Power jack, please use 9V DC adapter (negative inside and positive
outside).
13.1/4”MONO audio output jack.
Function Module
1.
Function of the LOOP module
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
2.
Function of DRUM module
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
1. DRUM indicator:
l Turning off: DRUM stopping.
l Red flashing: DRUM
stopping,SYNC function is turning on, the drum is waiting to play with the LOOP
synchronously, the flashing speed is the speed of the drum.
l Green flashing: DRUM is playing,
when the first beat of each DRUM cycle, the indicator flash yellow once.
2.DRUM footswitch:
l Click the
footswitch to play/stop the DRUM.
l Click twice to
stop the LOOP and DRUM at the same time.
3.The display screen: The number of DRUM type d01-d30is displayed on the
screen; when you using the TAPbutton,you can preview the speed value here.
Attention: d01-d30 is the DRUM types,040-240 is the speed.
4.TAP button: you can use it to preview the DURM speed or
tapping the speed you want, and you can use it to turn on/off the SYNC too.
Tap-Button using tips: Within the speed of 40-240, double-click the Tap Button
to get a new speed, each double-click can get a new speed once. Look at the
picture below:
5.
Left and right button: Click the left/right
button to select the DRUM; When the speed value is displayed on the display
screen,you can use the button to fine-tune the speed. But you can't fine-tune
the speed if the LOOP already have music, you can't fine-tune the speed when recording
either.
3.Instruction of DRUM+LOOP
The DRUM will save the type and speed automatically in the current
LOOP.But it's not real-time saveing,it will save 12 seconds later,after every
time you change the speed or type.
If DRUM is stopping,then you recording the first layer loop,after
finish recording,DRUM will intelligently generate a suitable drum speed,based
on the length of the music and the rhythmic beats of DRUM.However, in this
case, only the matching of the sampling time between the two can be satisfied,
it cannot automatically generate a perfect drum speed.
When you recording the first layer loop with the DRUM,you need to
notice the DRUM cycle,the LOOP will fill in the cycle base on DRUM.Let's use
8-beats DRUM as an example, look at the picture below.
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
When you play the DRUM,I suggest you notice to the DRUM indicator.When
the first beat of each DRUMcycle, DRUM indicator flash yellow once.lt is
recommended that you play the DRUM first, tune the drum you are satisfied with,
and then record the first layer loop with DRUM. You will get a better
experience by following this step.
If there's music in current LOOP,you can't fine-tune the speed,you
can't Tap tempo in free speed,when you Tap tempo,the DRUM will generate a
speed,this speed is near to your Tapping-tempo,also is adaptive for the
loop-music.
Therefore,if the music time of current loop is too short,and the DRUM
cydle time is too long.It's possible that the DRUM speed is too fast,so you
can't change the speed.The effective speed of DRUMis 40-240.
4.TUNER module
l Hold the left and
right buttons at the same time to enter the TUNER mode. In this mode, the
output is muted.
l The standard A's
frequency is 440Hz (Do not support modification).
l When tuning the
string,the note name will be displayed on the screen, and the 4 LED will show
the pitch.
l For note names
with sharp/flat signs, the system defaults only to use # (sharp sign) to
indicate, for example, "C#" is displayed on the screen as "
When tuning the string, the two LED in the middle lighting up at the
same time to indicate that the pitch of the string is close to the pitch of the
note name on the screen. The two LED on the left lighting up at the same time
to indicate that the pitch is lower than the note on the screen. The two LED on
the right lighting up at the same time to indicate that the pitch is higher
than the note name on the screen.
Software Support
1.
Please scan the code to download the software.
Attention:
If your phone is ISO,you can download "Cubesuite" from
APP STORE.
If your phone is Android,you can use the phone browser to scan the
code.
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
2.
You can go to company website,seek out the "Cubesuite"
,then download it to your computer.
3. Wireless BT connection tips: In order to avoid product by
third party misoperation, the Wireless BT open connection time of this product
is within 30 seconds after starting product.Customers who need to operate the
APP should use APP to connect Looper Drum as soon as possible after starting
product. The wireless BT function only supports mobile app communication and
external pedal communication , BT music is not supported.
4.APP using tips: Download the Cubesuite, run the APP and click
the "Scan nearby devices", then select the product to enter the
operation interface. Now you can use APP to edit the 30 Drums.
NOTE:
The mobile APP can be used to manage the 30 Drums,use to edit,
save, share, import/export, backup, and so on. lt can also support OTA
Upgrade and Restore the 30 factory drums rhythm.
The computer software is only used to manage 4 LOOP music.
FCC Warning
Statement Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
l Reorient or
relocate the receiving antenna.
l Increase the
separation between the equipment and receiver.
l Connect the
equipment into an outlet on a circuit different from that to which the receiver
is connected.
l Consult the
dealer or an experienced radio/TV technician for help.
Technical parameter
Input：Standard 1/4"jack-MONO/TS
Output：Standard 1/4”jack-MONO/TS
Output 2：Earphone output 1/8”jack
LOOP recording capacity：11 minutes
Single LOOP position recording capacity：5 minutes
Quantity of LOOP storage position：4
LOOP Sampling rate：44.1KHz/24bit -·+
Power supply 1：DC 9V≥300mA
Power supply 2：USB 5V≥300mA
Working current：90mA (DC 9V),125mA (USB 5V)
Input impedance：1M ohm
Output impedance：100 ohm
USB connection Type：Type-C
Accessory：USB cableX1
Disclaimer:Specifications
are subject to change without notice.
We make sure that when you
purchase the product, you get a paper copy of the manual, which is packaged in
the product box.
Seller Policy
Postage & Delivery
All products will be checked carefully and packed in good condition
before shipping.
Products are located in the warehouse in China.
Products will be received within 7-13
business days, If you are in the USA or
North America.
If you are in the Europe, you
will receive it within 7-19 business days.
If you are in the Asia, you will
receive it within 7-12 business days.
If you are in the South America,
you will receive it within 13-50 business days.
If you are in the Other regions and
countries, you will receive it within 13-50
business days.
About order handling time, usually we ship in 1-5 business days after receiving the clearing
payment. We do offer Expedited shipping methods.
Note:
Due to shipping policies restrictions, our shop is unable to ship to
Alaska, Hawaii, Puerto Rico, US Protectorates and APO/FPO address.
Your satisfaction is our aim!
Payment Policy
We gladly accept payment methods eBay approved.
Both of us must comply with the rules and requirements of the eBay. We
want to make sure the transaction is legal and compliant.
If you have any requirements or requests, please contact via eBay
message.
Your satisfaction is our aim!
(After-Sales Service) Return and Exchange
If the product you receive has quality problems, please contact us in
time, we will refund you or replace the product after confirmation.
Product Assurance 30-day unconditional return policy:
①Please keep the product packaging intact and undamaged, the product in
good condition and not affecting secondary sales, and send photos and videos of
the product to the customer service for confirmation.
②For returns caused by non-product quality defects, the buyer shall bear
the shipping costs.
③For returns caused by product quality defects, the round-trip shipping
costs shall be borne by the buyer. Half-year warranty policy.
④The shipping
costs incurred for repaired products shall be borne by the buyer.
⑤If the product
problem is caused by the buyer, the buyer shall bear the cost of parts and
other related maintenance costs.
Feedback
If you have any problems, Please don't give us a negative comment
without reasonable communication, please contact us in time. We’ll deal with
your problems and demands as soon as possible, to help you save money, give you
the best service quality and attitude, you can also buy High-Quality products
from our store!
The most important of all, Your Satisfaction is our aim!