Specification:
Size: 41*13cm
Small car sticker installation method (dry paste method):
1. Clean the body and keep it dry.
2. Determine the location you need to paste. Under normal circumstances, slowly stick the side, use a tool to flatten, and uncover the bottom paper.
3, if the graphics are not big, you can also tear off the transparent transfer film and stickers. But be careful not to accidentally stick.
4, after the paste, and then repeatedly scrape several times. Peel off the transparent transfer film.
5, in the door and sewing with a utility knife to draw a knife, inwardly wrapped stickers.
6. Do not let the car sticker and the body have any separation or protrusion.
Large car sticker installation method (wet paste method): Tools: rag, sprinkler, scraper or credit card
1. Clean the car body and evenly sprinkle water on the body parts to be attached - to reduce the viscosity of the sticker and to adjust the position.
2. Determine the location you need to paste. Slowly stick the side, gently flatten with a tool, and uncover the bottom paper.
3. When the door handle or anti-scratch strip is encountered, the material should be cut and wrapped according to the situation.
4, appropriate adjustment, after the general position of the figure is determined, forcefully scrape off water and air bubbles. Peel off the transparent transfer film.
5, in the door and sewing with a utility knife to draw a knife, inwardly wrapped.
6. Do not let the car sticker and the body have any separation or protrusion.
7, try to make the moisture in the car stickers dry, conditions can be moderately heated and dried. According to the weather conditions, wash the car after a day or two.
In order to reduce the difficulty of customer installation, we have provided the car stickers in advance to cover the transfer film. (except for the entire block of continuous graphics)
Package include:
1* sticker
