Hot Wire Board Foam Cutting Machine Working Table Tool Sponge Styrofoam Cutter
Regarding the problem of the electric cutting wire: the three-meter electric heating wire is on the wire storage wheel, and the customer needs to unscrew the screw before pulling it out for use
Package Included:
1 Set of Foam Cutting Machine
1 x Power Cable
1 x Cutting Wire
Installation:
1.Install the pillar, tighten the screw.
2.Install the demension ruler.
3.Release the wire, make the wire pass through the hole.
4.And then pass through the board hole, and let it buckle in the spring.
5.Turn on the power switch.
Note:
-Heating wire temperature can be adjustable, cutting different density and material need to adjust the appropriate temperature cutting.
-Usually, the electric wire is not red or slightly red is suitable. It can not be cut if the wire is very red.
-When cutting, the wire temperature is very high, should keep away from flammable and explosive materials.
-It is recommended to wear work glove when cutting.
-When complete cutting, please cut off the power in time.
-Some material may have a smell when cutting, it is recommended to cut in the ventilation environment.
Specification:
Product Name: Foam Cutting Machine
Color: Black
Material: Fireproof Density Board + Alloy
Size: 78x38x7cm
Max. Cutting Height: 20cm
Voltage: AC 110V
Power: 30W
The Wire Coil Diameter:
Temperature Adjustable: 50-300℃
Application: Cutting Foam, Sponge, Pearl Cotton, KT Board, etc.