Produktanalyse
Teleskopstange aus Aluminiumlegierung, Schnell-Teleskopschalter, rutschfester Griff, Betätigungsstange aus Aluminiumlegierung, Winkeleinstellschalter, linker und rechter Einstellschalter, Druckplattenfeder, Kunststoffbox aus Aluminiumlegierung, Druckplattensteuerventil
1. Aluminiumlegierungsmaterial, Kittbox mit großer Kapazität, mehr verpacken und eine größere Fläche abkratzen
2. Doppelte Federkonstruktion, der Kitt wird gleichmäßig entladen und der Kitt wird beim Verputzen mit konstanter Geschwindigkeit herausgedrückt
3. Die Federdruckplatte kann die Unebenheiten auf einmal ausgleichen, und die Druckplatte kann für eine dauerhafte Glätte eingestellt werden
4. 120 Grad können eingestellt werden, auf verschiedene Raumtypen reagieren, Knopfart stufenlos einstellen
5. Der Maschinenkopf kann fein eingestellt werden, um schwierige Winkel zu bewältigen, und verschiedene Winkel können verputzt werden
6. Stellen Sie das Schloss schnell ein, verlängern Sie die Teleskopstange, kratzen Sie die Decke ab, ohne eine Leiter nehmen zu müssen
7. Nur ein leichter Druck, die untere Rollrolle, mühelos drücken
8. Auslaufsichere Dichtplatte aus rostfreiem Stahl. Nach dem Einbau des Kitts kann der Kitt nach dem Entfernen abgekratzt werden
Spezifikationen:
Spachtelbreite: 25cm
Einstellbare Höhe des Griffs: 98 cm ~ 160 cm
Material: Aluminiumlegierung
Messerkörpermaterial: Edelstahl
Griffmaterial: Kunststoff
Eine Box mit großer Kapazität kann die Effizienz verbessern
Das Aluminiumlegierungsmaterial ist leicht und langlebig
Die Druckplattenabdeckung hat eine breite Öffnung zur einfachen Reinigung
Zusammenbau und Verwendung
1. Stellen Sie sicher, dass die Plat Box-Klinge die Dicke eines Fingernagels (1-1,5 mm) über den Kufen hat. Die Klinge kann mit Schrauben am Klingenhalter eingestellt werden, um die erforderliche Höhe zu erreichen.
2. Testen Sie, ob sich der Klingenhalter frei auf und ab bewegen kann.
3. Befestigen Sie den Griff Ihrer Plat-Box, indem Sie ihn auf die Box schieben und die beiden Flügelmuttern festziehen.
4. Passen Sie die Spannung am Klingenhalter an die Stärke der Verbindung an, die in der Maschine verwendet werden soll.
5. Mit dem Griff zusammenbauen.
6. Stellen Sie die Box in einem leichten Winkel zum Griff ein und ziehen Sie den Knopf fest, um den Winkel zu fixieren, damit der Kopf stationär bleibt.
7. Setzen Sie die Flatbox auf das Gelenk und lassen Sie den Knopf los, während Sie Druck ausüben, damit die Box und der Griff ihre eigene natürliche Position finden.
8. Stellen Sie die Länge des Griffs ein: Drücken Sie den Knopf, um die Länge zu verlängern (max. 63,8 '').
Lieferinhalt:
1 x 9.8" Flat Box
1 x 40 '' - 63,8 '' Griff
product analysis
Aluminum alloy telescopic rod, quick telescopic switch, non-slip handle, aluminum alloy operating rod, angle adjustment switch, left and right adjustment switch, pressure plate spring, aluminum alloy plastic box, pressure plate control valve
1. Aluminum alloy material, large capacity putty box, pack more and scrape a larger area
2. Double spring design, the putty is discharged evenly, and the putty is pushed out at a constant speed when plastering
3. The spring pressure plate can smooth out the bumps at once, and the pressure plate can be adjusted for lasting smoothness
4. 120 degrees can be adjusted, respond to different types of space, steplessly adjust button type
5. The machine head can be finely adjusted to deal with difficult angles, and various angles can be plastered
6. Quickly set the lock, extend the telescopic rod, scrape the ceiling without having to take a ladder
7. Just a light push, the bottom roll, push effortlessly
8. Stainless steel leakproof sealing plate. After installing the putty, the putty can be scraped off after removal
Specifications:
Spatula width: 25cm
Adjustable handle height: 98cm~160cm
Material: aluminum alloy
Knife body material: stainless steel
Handle material: plastic
A large capacity box can improve efficiency
The aluminum alloy material is lightweight and durable
The pressure plate cover has a wide opening for easy cleaning
assembly and use
1. Make sure the Plat Box blade is fingernail thickness (1-1.5mm) across the skids. The blade can be adjusted with screws on the blade holder to achieve the required height.
2. Test that the blade holder can move up and down freely.
3. Attach the handle to your plat box by sliding it onto the box and tightening the two wing nuts.
4. Adjust the tension on the blade holder to the strength of the joint to be used in the machine.
5. Assemble with the handle.
6. Set the box at a slight angle to the handle and tighten the knob to fix the angle to keep the head stationary.
7. Place the Flatbox on the hinge and release the button while applying pressure to allow the box and handle to find their own natural position.
8. Adjust the length of the handle: press the button to extend the length (Max 63.8'').
Delivery content:
1 x 9.8" flat box
1 x 40'' - 63.8'' handle