T862++ BGA IR Welder Infrared Rework Station SMD Welder Heating Repair Machine

Introduction

The T-862++ uses an Infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies air currents.

Unlike Air Re-Work systems, The T-862++ uses an Infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies air currents.

Infrared soldering technology with independent exploration capabilities via three (3) focus lenses which are included with the package.

Technician focused infrared heat is easy to target most component removal/replacement and re-work.

The Workstation has a 120 X120mm a 650W controlled Pre-heating System.

Infrared heat source bulbs are long-lived, in-expensive and easily replaced.

Processor controlled set-point regulated temperatures with thermocouple feed-back.

Integrated and adjustable Infrared (IR) eye protection.

Can suitable for the entire component, especially Micro BGA component.

The T-862++ system also contains a temperature controlled touch-up iron and stand.

Extra soldering tools are not necessary to solder/unsolder and re-work Surface MountTechnology (SMT) components 15-35mm in size

Training is illustrated in factory provided video.
 

2 years free warranty and life time free maintenance service

 

Technical Parameters

Working Voltage: AC220V/50Hz (we stock the item specail for the country all over the world)

Output power: 800W

Infra-red lamp body temperature adjustable: 100°-250°

Preheating dish temperature adjustable: 60-200

Feature

Infrared soldering technology with independent exploration capabilities via three (3) focus lenses which are included with the package.

Technician focused infrared heat is easy to target most component removal/replacement and re-work.

The Workstation has a 120 X120mm a 650W controlled Pre-heating System.

Infrared heat source bulbs are long-lived, in-expensive and easily replaced.

Processor controlled set-point regulated temperatures with thermocouple feed-back.

Integrated and adjustable Infrared (IR) eye protection.

Can suitable for the entire component, especially Micro BGA component.

The T-862++ system also contains a temperature controlled touch-up iron and stand.

Extra soldering tools are not necessary to solder/unsolder and re-work Surface MountTechnology (SMT) components 15-35cm in size

Training is illustrated in factory provided video.

What you will get
T-862++ Chassis
PCB Board holder
936 Searing-iron
936 searing-iron rack
Lamp Body and Lens(D=28mm)
Lens(D=38mm)
Lens(D=48mm)
Eye protection(IR Filter)
Cell guide
Focus holder
Focus holder control knob
Fasten nut for focus holder
Steady ring
Fasten nut for steady ring
Power Cable (220VAC )
5mm Fuse, 10A 250VAC(Spare)
CD User Manual w/Video
NOTE :British standard conversion plug shipped from China 

 
 
 
We accept PayPal and bank transfer.
All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it. We accept Credit Cards via PayPal.
 
4-9 working days to:UK by DHL
5-7 working days to:France ,Germany ,spain ,Italy
6-10 working days to:Other countries
 
 
 
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
 
 Please keep the original box or packaging within 15days since item received. Returned item must come with original box or packaging.
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
 
  • Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
  • Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
  • Please contact us with ebay message.
  • Please feel free to contact us if you have any questions.
    
PushAuction
DataCaciques