Features:
Plug Type: H13 9008 ,High Low beam
Power: 200W/set(100W/bulb)
LED Quantity(each bulb): 2pcs* COB chips
Luminous Flux: 20000lm/set(10000lm/bulb)
Operating Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
Color Temperature: White 6000K
IP68 rated water and dust seal,360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-+80 degree Celsius
Over 50000hrs lifetime
1200 FEET OF VISION: 10,000 lumen and 100W high output arm your car with a farther & wider lighting field. Nartoup H13 bulbs providing 4 times brighter more night vision than halogen bulbs, provide up to 1200 feet visibility without any black spots or glare to upcoming vehicles, you can see farther and clearer than ever before
FOCUSED BEAM, BETTER VISIBILITY: 0.04in ultra-thin chip copper board, perfectly reflect a focused beam pattern with 360°full lighting, which improve the visibility to show clearer road situation, more safer driving experience
EFFICIENT COOLING SYSTEM & LONG LIFESPAN: Aviation 6063 aluminum profile as heat conduction syste and 12,000RPM turbofan directly doubles heat dissipation keep the light bulb in appropriate working temperature, efficiently prolonging lifespan of H13 bulbs up to 50,000 hours to avoid frequent bulb replacements.
EASY INSTALL: Built-in constant current CPU, instant full brightness without start-up relay, reduce radio interference issues, fitment rate up of 98% vehicles, but please note Resistors(decoder) might be needed for some German vehicles,such as Mercedes-Benz and BMW may require a decoder or load resistor (not included) to be installed in order to use, rather than a bulb problem.
UPGRADED IP68 WATERPROOF & DUST SEAL: H13 bulbs with rubber ring seals, shock resistant, working temperature -40℃～+80℃ degree Celsius, It can operate stably even in extreme weather.
Description:
(2pcs/set)H13 COB LED light bulbs conversion kit
Extremely bright COB chip(USA),360 degree clear beam no blind zone
Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation
All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
Built-in constant current CPU,instant full brightness without start-up relay
Two-way heat dissipation channel:
1. All-in-one aluminum profile as heat conduction system,360 degree heat radiating
2. High speed mute fan(12000R/Min),high Air flow for faster cooling rate
Package Included:
2x H13 LED light bulbs
New boxes and old boxes are sent randomly!!!
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulbs.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulbs.
After service Notification：
If you are satisfied with our product and service please leave us a positive feedback,if there is any problem when you received the package,please feel free to contact us,we will be definitely give you a satisfying solution,when you choose the return reason .please choose the reason"i don't like it".By this option we will accept your return immediately and provide return label for full refund.the others reason to return will take both of us many troubles to handle.
If you are satisfied with our product and service please leave us a positive feedback,if there is any problem when you received the package,please feel free to contact us,we will be definitely give you a satisfying solution,when you choose the return reason .please choose the reason"i don't like it".By this option we will accept your return immediately and provide return label for full refund.the others reason to return will take both of us many troubles to handle.
On Apr 18, 2024 at 08:59:25 PDT, seller added the following information: