Specification:
Condition: New
Input Shaft Dia: 17.27 mm
Input Shaft Length: 58.74 mm
Rack Length: 1089.03 mm
Return Port Thread Size: M16 x 1.5
Thread Length: 45.47 mm
Condition: New
Tie Rod End Included: No
Rack Pinion Boots Included: Yes
Input Shaft Diameter: 17.27 mm
Input Shaft Length: 58.74 mm
Rack Length: 1089.03 mm
Return Port Thread Size: M16 x 1.5
Thread Length: 45.47 mm
Total Turns Lock To Lock: 3
Reference Number: 53601SDAA01, 53601SDAA02,
53601SDAA03, 53601SDAA04, 53601SDNA01,
53601SDNA03, 53601SDNA04, 53601SEPA01, 26-2703
Fitment：
For 2003-2007 Honda Accord L4 2.4L Coupe
For 2003-2007 Honda Accord L4 2.4L Sedan
For Acura 2004-2008 TL V6 3.2L Sedan
For Acura 2007-2008 TL V6 3.5L Sedan
Package Include：1PC Power Steering Rack and Pinion
Advantage of Rack and Pinion:
100% Performance Testing
100% New Premium Component
Meet or Exceed OEM Specifications
Functions of Rack and Pinion Assembly:
1. Conversion of the steering wheel's rotational motion into the
linear motion needed for the vehicle's wheels to turn
2. Reduction of gears, which makes it easier for the steering wheel
to turn the wheels.
Please get in touch with us at any time if the product has any quality
issues, such as damage or isn't appropriate for your automobile.
Note:
1.In order to ensure the normal operation of the steering gear,
relevant parts shall be cleaned as much as
possible before installation.
2.Please double check the part number of your item,
matching information is for reference only.
3.If you are unsure of the item, please contact us before
buying to avoid unnecessary return, thanks!
How to Replace a Power Steering Rack
1.Drain the power steering fluid, loosen the front wheel nuts
and jack up the car. Once the vehicle is properly supported on the
jack stands, remove the front wheel lug nuts and the wheels.
2.Disconnect the tie rods
Detach the clamps connecting the steering column to the piston.
Disconnect the outer rod ends using a special tie rod separator
or ball joint fork. Loosen the nuts and turn the rods.
3.Remove the faulty steering rack
Insert a drainage pan under the car to catch any fluid and
unbolt the power steering rack from its seating.
Remove the rack via one of the wheel wells.
Use plenty of effort, patience and ingenuity.
4.Install the new power steering rack
Using the same exit point as your entry point,
insert the replacement rack into position using the required force.
Measure the length of the old rack to determine the precise
positions of the tie and cotter pins. Insert the pins in the new rack.
5.Reattach the hoses, except the steering fluid reservoir return line.
Replace the components that were removed to enable access to
the rack, together with the front wheels.
6.Bleed the power steering system
Start the car. Turn the steering wheel back and forth for
about 15 minutes to release air trapped in the system.
Turn off the engine and let it stand before topping up the
reservoir with fluid.If the fluid is light brown in colour
or has foam on the top, repeat the process until the fluid is
clear. Reattach the reservoir hose, remove the drainage pan,
lower the car and tighten the wheel nuts.
