30mpa High Pressure Pump Electric Air Gun Air Compressor Auto-stop 12v 110v
Description:
This High-pressure Air Pump, Without Adding Oil and Circulating Cooling Water, Which Reduces the Trouble of Connecting the Water Pump and Simplifies the Operation Process. the Built-in High-power Fan Can Greatly Improve the Cooling Efficiency and Make the Compressor Continuously Fill the Air Gun. Built in Power Adapter and Simple Connection: Built in Power Converter and Compressor. the Rated Power Is 350w. After 25 Minutes of Continuous Pumping, the Compressor Will Automatically Stop Filling Water to Ensure Safety. Restart After 8 Minutes of Rest. the Cooling Fan Is Manually Controlled. Adopt Portable Design and Bursting Disc: Portable, Safe and Durable.
Specifications:
Voltage: 110v/60hz
Volume: 30.5*22.5*15cm
Cooling Method: Fan Air Cooled
Compression Mode: 3-Stage Compression
Power Supply: 12v Dc
Power: 350w
Material: Iron and Copper
Inflation Pressure: 30mpa or 4500psi
Oil or Water: Neither Need
Shut off: Auto-shutoff
Applications: Suitable for Most Air Guns and Paintball Hpa Tanks
Filling Speed: 0.5l, 0 to 300bars, Needs 20 Minutes Around. 200-300bars, Needs 8 Minutes Around
Product Size: 21.5*17*13cm
Packing Size: 32*27*23cm
Net Weight: 7.3kg
Gross Weight: 9kg
Features:
1. There Is No Need to Add Oil and Circulating Cooling Water, Which Reduces the Trouble of Connecting the Water Pump and Simplifies the Operation Process.
2. the Built-in High-power Fan Can Greatly Improve the Cooling Efficiency and Make the Compressor Continuously Fill the Air Gun.
3. Built in Power Adapter and Simple Connection: Built in Power Converter and Compressor. the Rated Power Is 350w. After 25 Minutes of Continuous Pumping, the Compressor Will Automatically Stop Filling Water to Ensure Safety. Restart After 8 Minutes of Rest. the Cooling Fan Is Manually Controlled.
4. Portable Design and Bursting Disc: Portable, Safe and Durable.
Packing List:
1x Air Pump
1x Filter
1x Jumper
1x Power Cord
1x Instruction Manual
2x Fuses
2x Plugs
5x Shims
5x Safety Tablets
5x Sealing Rings
5x Filter Cotton
First Use Steps:
1 . Check the 110v Ac Voltage Set on the Converter
2 . Connect the Power and Air Hose
3 . Turn on the Cooling Fan
4 . Tighten the Bleed Valve to the Right
5 . Start the Compressor
Notes:
1. the Inflation Pressure Should Be less than 30mpa. Do Not Over-inflate Your Air Gun .
2. the Duty Cycle Is : Continuous Inflation for 25minutes and Rest for 10 Minutes
3. If the Temperature Reachs 80 Degrees , Please Stop Filling and Keep the Fan Running to Dissipate Heat
4. Tighten the Bleed Valve Before Inflation , Loosen It After Filling Completion to Release the High-pressure Air in the Hose , and Then Disconnect the Air Gun .
5. Always Turn on the Cooling Fan First and Turn off Last . Keep the Cooling Fan Running Until the Compressor Cools Below 50℃
Brand | Unbranded |
---|---|
MPN | Does Not Apply |
Power Source | 30MPa/4500PSI |
Application | Industrial |
Voltage | DC12V AC110V |