Specifications：
★Plug Type: 9012/HIR2
★LED Quantity(each bulb): Brand LED chips
★Operating Voltage: DC 9-32V(fit 12V/24V vehicle)
★Color Temperature: Cool White 6000K
★IP68 water and dust seal,360 degree beam angle
★Operating Temperature: -40~+80 degree Celsius
★Material: aviation 6063 aluminum profile
★Over 50,000 hours life time
★Plug Type: 9012/HIR2
★LED Quantity(each bulb): Brand LED chips
★Operating Voltage: DC 9-32V(fit 12V/24V vehicle)
★Color Temperature: Cool White 6000K
★IP68 water and dust seal,360 degree beam angle
★Operating Temperature: -40~+80 degree Celsius
★Material: aviation 6063 aluminum profile
★Over 50,000 hours life time
Features：
(2pcs/set)9012 LED headlight conversion kit
★Imported CSP chips---high Optical density & low heat resistance,enhance light efficiency up to 95%
★Spread soft white light on road evenly without dark spot/foggy light,will not dazzle on-coming traffic
★6000K white light show all weather road situation clearly without glare
★Advanced heat conduction system+unique grooved heat sink fins keep the light bulb in appropriate working temperature
★Constant current instant start up,no circuit interference and electromagnetic radiation
MORE TIPS: Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing. Some particular vehicles may require additional accessories to install LED, if you encounter any problem during installation, please feel free to contact us via eBay message.
Package Content:
2x 9012 LED Bulbs
New boxes and old boxes are sent randomly2x 9012 LED Bulbs
Automotive LED headlight advantages:
LED lights than traditional halogen energy, more power.
Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable. Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with ballast repair lower than 8% .
Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.
LED lights than traditional halogen energy, more power.
Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable. Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with ballast repair lower than 8% .
Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulbs.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulbs.
On Apr 23, 2024 at 07:26:30 PDT, seller added the following information: