TESTING & COSMETIC NOTES:
https://www.ocdepot.com/template/spacer.gifThis is a USED WORKING item in VERY GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
The unit has been reset to the factory default settings. See console log below.

COMPONENTS INCLUDED IN THIS AUCTION:
https://www.ocdepot.com/template/spacer.gif
• (1) - CISCO SG350-52MP-K9 V01 52-PORT GIGABIT POE+ MANAGED NETWORK SWITCH
• (1) - POWER CORD
• (1) - PAIR OF RACKMOUNT EARS

REPLACEMENT or MONEY BACK GUARANTEE:
https://www.ocdepot.com/template/spacer.gif
When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.

ADDITIONAL INFORMATION:
https://www.ocdepot.com/template/spacer.gif
The following is the Console Log from this item:
**************************************************
***************** SYSTEM RESET *****************
**************************************************
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot

BootROM 1.41
Booting from NAND flash


General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
** Link is Gen1, check the EP capability
PEX: pexIdx 0, Link upgraded to Gen2 based on client cpabilities
DDR3 Training Sequence - Ver TIP-1.56.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
Updated Physical Mem size is from 0x20000000 to 10000000
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED


ROS Booton: Aug 20 2017 19:04:11

Press x to choose XMODEM...
Booting from NAND flash

Running UBOOT...


U-Boot 2013.01 (Aug 20 2017 - 19:03:56) Marvell version: 2014_T3.0_eng_dropv6 2.
3.56

Loading system/images/active-image ...
Uncompressing Linux... done, booting the kernel.
ln: console: File exists
Sun Aug 20 06:28:00 UTC 2017



























Linux MARVELL_LINUX 3.10.70 #2 SMP Sun Aug 20 19:04:38 IDT 2017


MAC Address : 00:42:5a:37:7a:b4.

Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.

*******************************************************************
*** Running SW Ver. 2.3.5.63 Date Aug 20 2017 Time 19:03:04 ***
*******************************************************************

HW version is V01
Base Mac address is: 00:42:5a:37:7a:b4
Dram size is : 512M bytes
Dram first block size is : 370688K bytes
Dram first PTR is : 0x89600000
Dram second block size is : 4096K bytes
Dram second PTR is : 0x19000000
Flash size is: 256M
20-Aug-2017 06:28:09 %CDB-I-LOADCONFIG: Loading running configuration.
20-Aug-2017 06:28:09 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
Slot 1 - SG350-52MP
Device 0: GT_98DX3236 (AlleyCat3)
Device 1: GT_98DX3236 (AlleyCat3)
CPLD version is: 0x00

------------------------------------
-- Unit Factory Default --
------------------------------------

20-Aug-2017 06:28:18 %INIT-I-InitCompleted: Initialization task is completed


>20-Aug-2017 06:28:18 %PNPAGENT-I-AGENTREADY: PnP is ready

-----------------------------------
-- Unit Number 1 Master Enabled --
-----------------------------------

20-Aug-2017 06:28:24 %Environment-W-RPS-STAT-MSG: Power supply source changed to
Main Power Supply.
20-Aug-2017 06:28:27 %MLDP-I-MASTER: Switching to the Master Mode.
20-Aug-2017 06:28:35 %Entity-I-SEND-ENT-CONF-CHANGE-TRAP: entity configuration c
hange trap.
20-Aug-2017 06:28:35 %NT_poe-I-PoEPowerSourceChange: Active power source set to
PS for unit 1
20-Aug-2017 06:28:35 %Environment-I-FAN-STAT-CHNG: FAN# 1 status changed to oper
ational.
20-Aug-2017 06:28:35 %Environment-I-FAN-STAT-CHNG: FAN# 2 status changed to oper
ational.
20-Aug-2017 06:28:35 %Environment-I-FAN-STAT-CHNG: FAN# 3 status changed to oper
ational.
20-Aug-2017 06:28:35 %Environment-I-FAN-STAT-CHNG: FAN# 4 status changed to oper
ational.
20-Aug-2017 06:28:35 %SNMP-I-CDBITEMSNUM: Number of running configuration items
loaded: 0

20-Aug-2017 06:28:35 %SNMP-I-CDBITEMSNUM: Number of startup configuration items
loaded: 0
The SSH Server is generating a default RSA key.
This may take a few minutes, depending on the key size.
The SSH Server is generating a default DSA key.
This may take a few minutes, depending on the key size.
The SSH Client is generating a default RSA key.
This may take a few minutes, depending on the key size.
The SSH Client is generating a default DSA key.
This may take a few minutes, depending n the key size.
20-Aug-2017 06:29:18 %SYSLOG-N-LOGGING: Logging started.
20-Aug-2017 06:29:27 %SSL-I-SSLCTASK: Starting autogeneration of self-signed cer
tificate - 2048 bits

Generating RSA private key, 2048 bit long modulus
20-Aug-2017 06:29:29 %SSL-I-SSLCTASK: Autogeneration of self-signed certificate
was successfully completed

Generating RSA private key, 2048 bit long modulus

>lcli

Console baud-rate auto detection is enabled, press Enter twice to complete the d
etection process



User Name:
Detected speed: 115200


User Name:cisco
Password:*****

Please change your password from the default settings. Please change the passwor
d for better protection of your network. Do you want to change the password (Y/N
)[Y] ?
 
 SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes>
SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes> SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes> SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes>
SearchBy36 - 259975 | Loc: F43 | L: Rob | T: Rob | PM: Nick  | QTY: 0 | Plan: M1- Q3 5 pounds or more | 24.00"x21.00"x7.00" 24.00lbs | Start: $0.00 | BIN: $174.98 |  | 2024-04-12 |  | Computers/Tablets & Networking::Enterprise Networking, Servers::Switches & Hubs::Network Switches