Features
Product Use
Works Well On
How to Mounting Depressed Centre Wheels
1. When the adaptor has been tightened, there should be a slight clearance between the flange and the wheel at (A). This ensures that clamping pressure is exerted only at the centre of the hub section.
2. The outer part of the face of the flange adjacent to the wheel should be tapered as above and this allows the full width of the flange to support the wheel during the grinding operation.
3. A paper washer should not be used on the hub section of a depressed-centre wheel.
Grit: Coarse 60
Abrasive: Aluminum Oxide and White Fused Alumina
Construction: Double Fiberglass Mesh & Double Cloth
Dia.: 4-1/2 in, 115mm
Thickness: 0.045 in, 1.14mm
Arbor Hole / Tool Mounting: 7/8 in, 22.23mm
Type: Depressed Center T42/27
Max RPM: 13,300
Packing Unit: 50 Pack
Do wear the proper personal protective equipment (PPE). Required PPE is safety glasses along with goggles or a face shield. Wear other PPE as needed, such as gloves, dust mask, apron, etc.
Shipped same-day from Hebron via USPS Priority Mail, UPS Surepost or UPS Ground, the shipment method depends on the quantity and your address