16” Fans Details:
Diameter: 16'' (Blade to Blade)
Voltage: DC 12 Volts
Maximum Fan CFM (Cubic Feet per
Minute): 2150 cfm
Wattage: 120Wattage
Thickness (in): 2.500"
Number of Blades: 10 S-Type blades
Maximum Fan RPM (Revolution (s) Per
Minute): 2,250 rpm
Amp Draw: 10 amps
Our electric fan has a 120w power
motor, which is more powerful and efficient than other inferior fans selling on
market. Most fans on eBay have a motor power of 80w, which cannot provide
enough cooling for the engine. Moreover, they are usually assembled by the
straight blades, it is cheaper and poor-quality and easy to get broken.
1. 120Welectric motor to provide strong power and high rotation speed
2. S Blade pull push design, to make
air flow more efficient and bring more cooling Effect
3. Lightweight and thin volume
design, not only to save more engine bay space and also looks very well.
4. Provide extra temperature relay
switch.
Thermostat Kit:
Universal fit for any automotive vehicle and electric fan.
Activates by grounding electric fans at preset temperature.
180'F turn-on temperature, 165'F turn-off temperature.
3/8" NPT thread-in brass probe included.
Probe typically threads into radiator, water outlet or manifold.
Thermostat Relay Kit Instructions:
RED + connect directly to battery.
WHITE wire to ignition switch power source.
BLACK goes to thermos switch.
BLUE wire goes to the Fans.
AA5052 Aluminum Shroud
and Fans:
The New Design fan
and the AA5052 fan shroud effectively drive the heat over and out the
engine compartment rather than thrusting it into the front of the engine. The
fan shroud basically houses the fan blades securing it in place and keeping it
from damaging the other engine components that may disturb the smooth and even
operation of the engine. With excellent operating temperature management,
allowable levels of engine temperature are stabilized. Investing in proper
maintenance though will considerably benefit the ride and driving quality in
maintaining the ideal working conditions of the engine.
- Shuttered design AA5052 fan
shroud to guaranteed airflow passes high efficiently. Make your engine bay
perfect!
- S blade fans, Push or Pull Type design, lightweight Plastic Durable
Material.
- Additional with thermostat, professional matching advice, consider
for every detail and needed.
The Advantage of
our Radiator:
Our Radiator is
made of AA5052 aircraft aluminum. It’s different from other sellers
T-3303 Series. In fact, AA5052 series Aluminum is much better than T-3303 series.
More than 90% of
aftermarket manufacturers use the T-3303 series Aluminum, because it is cheaper
and easier to get the material. However, T-3303 aluminum has many
disadvantages, such as poor polishing effect, softness, easiness to scratch and
corrode, poor heat dissipation effect. If the T-3303 aluminum radiator is
operated in high pressure and high temperature for a long time, the leaking
problem would occur very soon.
AA5052 Aluminum is an
Al-Mg alloy with good corrosion resistance, excellent reliability and cold
workability and strength. The main alloying element of AA5052 is magnesium,
which has good forming and processing properties. It is widely used in the
manufacture of aircraft fuel tanks, oil pipes, and sheet metal parts of
transportation vehicles and ships, hardware products, and electrical-appliance
casings.
This AA5052 Aluminum Radiator
is designed to provide maximum cooling efficiency to prevent premature engine
failure. Its light-weight, and high-heat transferring aluminum features a tube
and fin design that, dramatically increases surface area that enables the heat
to dissipate more efficiently. This AA5052 Aluminum Radiator is at least 30%-45% more
efficient than stock ones. Most importantly, it has a much higher capacity for
coolant than stock ones, which means that your cooling system will be more
efficient and will be more resistant to temperature surges in racing
applications.
- Made from Aircraft AA5052 grade aluminum for prolonged
lifespanand with raw aluminum finish
- Brazed core technology to guarantee optimum performance and
dependability
- All AA5052 Aluminum
2mm thick tanks and fittings, Ensure it's hard and durable
- Carefully crafted to exceptional OE standards for precise fit.
- Ergonomic design CNC machined cap with Engraved craftsmanship,
anodized treatment.
- Billet Aluminum CNC machined fill neck rugged and durable
- OEM style brass petcock drain much better than other plastic one on
eBay