We all have OTTO CHEMISTRY Products in the range.

 

OTTOFLEX® sealing

OTTOFLEX® object sealing tape
Characteristics
Fleece-laminated special elastomer tape
Very elastic, resistant to aging and tear-resistant
Compatible with commercially available tile adhesives and solvent-free coatings
Secure connection with OTTOFLEX® liquid film / sealing slurry / sealing membrane
Compatible with OTTO silicone sealants
application areas
Sealing in the corner formation to bridge cracks and joints 

OTTOFLEX® sealing tape
Characteristics
Fleece-laminated special elastomer tape
Extremely elastic, resistant to aging, highly tear-resistant
Compatible with commercially available tile adhesives and solvent-free coatings
Compatible with OTTO silicone sealants
Secure connection with OTTOFLEX® liquid film / sealing slurry / sealing membrane
Easy to process thanks to the crease
Meter scaling
application areas
For indoor and outdoor use
Sealing in the corner formation to bridge cracks and joints 

OTTOFLEX® wall sealing sleeve
Characteristics
Secure connection with OTTOFLEX® liquid film / sealing slurry / sealing membrane
application areas
Elastic sealing sleeve for permanently waterproof sealing in the floor area at pipe penetrations under tiles, slabs and ceramic coverings 

OTTOFLEX® expansion zone cuff

Characteristics
Secure connection with OTTOFLEX® liquid film / sealing slurry / sealing membrane

application areas
Special elastomer cuff (available in 3 sizes)
135 x 135 mm for pipe diameters 20-35 mm
160 x 160 mm for pipe diameters 31-50 mm
215 x 215 mm for pipe diameters 69-110 mm
with expansion zone and sealing lip for permanently watertight sealing of pipe penetrations under tiles, slabs and ceramic coverings 

PCI Billy Click
Installation aid in conjunction with PCI wall sleeve
Product features:
For secure sealing of the wall collar PCI Pecitape 10 x 10, when installing a pipe extension later
Areas of application:
Areas of application: interior, wall
To protect the wall sleeve PCI Pecitape 10 x 10
For pipe diameters 1/4" to 1/2" 

OTTOFLEX® floor sealing sleeve
Characteristics
Secure connection with OTTOFLEX® liquid film / sealing slurry / sealing membrane
application areas
Elastic sealing sleeve for permanently waterproof sealing in the floor area at pipe penetrations under tiles, slabs and ceramic coverings 

OTTOFLEX® inside corner and outside corner

Characteristics
Secure connection with OTTOFLEX® liquid film / sealing slurry / sealing membrane
application areas
Elastic sealing corners for permanently watertight sealing of inside corners under tiles, slabs and ceramic coverings

 OTTOFLEX® tub edge sealing tape

Characteristics

Polypropylene fleece with butyl rubber
Flexible sealing tape
Integrated self-adhesive butyl strip for easy attachment with release film
Compatible with OTTO silicone sealants
Secure connection with OTTOFLEX® liquid film / sealing slurry / sealing membrane
application areas
Sealing tape for flexible sealing between shower or Bathtub and wall 

OTTOFLEX® soundproofing tape
Characteristics
Single-sided self-adhesive PE foam tape with PE release film
application areas
For sound insulation between shower or Bathtub edge and wall 

OTTOFLEX® protective tape
Characteristics
Self-adhesive protective tape, tightly woven with double fabric in the middle
Protection of the composite seal (e.g. OTTOFLEX® sealing tape) from unintentional cutting during renovation
Fabric made of polyamide and aramid with hot melt adhesive and release film
Thin for little application under the tile
Flexible for easy processing
application areas
Self-adhesive protective tape as a supplement to sealing tapes for use in the areas of silicone joints
All joint areas that need to be protected against cuts. Wall joints, floor joints, bathtub and shower edges 

OTTOFLEX® sealing membrane The composite seal
Characteristics
Polyethylene sealing membrane with special fleece on both sides
Waterproof and water vapor barrier
High practical stretchability and crack-bridging
Age-resistant and rot-proof
Good resistance to aqueous solutions of salts, acids and alkalis
The product is alkali-resistant in accordance with the testing principles according to AbP sealing in combination with tiles and slabs and according to ETAG 022
Corresponds to building material class B2 "normally flammable" according to din 4102-1
application areas
Composite sealing in damp rooms and wet rooms under ceramic coverings and natural stone using the thin-bed process (e.g. wet areas such as bathrooms, shower systems, pool circulation areas of swimming pools, saunas, steam baths, steam saunas, but also industrial areas in the food industry e.g. breweries, dairies)
Flexible composite sealing under ceramic coverings and natural stone on balconies, terraces and arcades (not over used rooms) with a gradient = 1.5%
OTTOFLEX® sealing membrane is a crack-bridging, decoupling, waterproof, alternative sealing membrane with special fleece for secure anchoring of the tile adhesive applied to it 

OTTOCOLL® M 500
The extremely water-resistant premium hybrid adhesive
1K hybrid polymer STP adhesive
For indoor and outdoor
Extremely water resistant
Compatible with natural stone
Elastic bonds
Adheres to damp surfaces
Product details
The premium hybrid adhesive OTTOCOLL® M 500 is the ideal choice for elastic and tension-balancing bonds between a wide variety of materials. Due to its very good adhesion and processing properties, the adhesive can be easily used on many surfaces without pre-treatment with a primer. Bonding is even possible on damp surfaces. When cured, the adhesive is also extremely water-resistant.
Characteristics
Extremely water resistant
For bonds with high water loads
Very good adhesion to many materials
No pretreatment necessary
Compatible with natural stone
Does not cause greasing of natural stones
Also adheres to damp surfaces
No lost working time due to drying of the substrates
Elastic
Balances movements
Silicone free
Isocyanate free
No risk to health
application areas
Bonding stone, natural stone and ceramics
Bonding of painted and enameled glass
Bonding of OTTOFLEX® sealing membrane in the overlap area as well as with accessories such as sealing tape, sealing corners and sealing sleeves (according to the requirements of ETAG 022)
Bonding mirrors to ceramics, glass, plastic, stainless steel, aluminum, wood, concrete, etc.
Gluing window sills, baseboards, decorative strips and stair treads
Bonding in body and vehicle construction, wagon and container construction, metal and apparatus construction, shipbuilding
Bonding in food-related areas
Gluing and assembling a wide variety of materials such as wood, wood-based materials, plastics, metals and mineral substrates 

OTTOFLEX® primer
Characteristics
Butadiene-styrene-based synthetic resin dispersion
Solvent-free
When combined with OTTOFLEX® liquid film, it meets moisture resistance classes A0 according to the ZDB data sheet and A according to abP
Store and transport frost-free
application areas
Pretreatment for OTTOFLEX® liquid film on absorbent and highly absorbent substrates, such as gypsum plasterboard, gypsum components, plaster, concrete, aerated concrete, masonry, stone, screed, chipboard or wood fiberboard 

OTTOFLEX® deep primer
Characteristics
Solvent-free primer for floors and walls
Penetrates deep underground
Forms a very good adhesion promoter for subsequent application layers
Improves the adhesion of plasters, tile adhesives and wallpapers
Can be diluted up to 1:2 with water
Store and transport frost-free
application areas
Priming and solidification of absorbent and less absorbent substrates
Primer before applying acrylate coatings and commercially available solvent-free tile adhesives on gypsum plasterboards, gypsum and lime-gypsum plasters, gypsum floorboards, gypsum fiber boards, concrete, aerated concrete, sand-lime brick, bricks, masonry, plasters, screeds, anhydrite and mastic asphalt screeds, building boards, fillable and self-leveling floor leveling compounds
Use as part of tiling according to din 18157-1
Makes it easier to remove wallpaper during renovation work
Increases the load-bearing capacity and strength of the subsurface 

OTTOFLEX® adhesive primer
Characteristics
Adhesion-improving primer for floors and walls
High bond strength even on dense and smooth surfaces such as glazed tiles
Very short drying time of 1 hour for non-absorbent surfaces, no drying time for absorbent surfaces
Compatible with commercially available tile adhesives and solvent-free coatings
Solvent-free
Store and transport frost-free
application areas
Primer and bonding bridge on absorbent and non-absorbent floor and wall surfaces indoors and outdoors before laying ceramic coverings.
Suitable for a wide variety of substrates, such as hydraulically hardening cement, lime and gypsum plasters, gypsum floorboards, gypsum fiber boards, brick masonry, aerated concrete, sand-lime brick, cement, anhydrite, magnesia and mastic asphalt screeds, wooden floorboards, self-leveling floor leveling compounds, natural stone, glazed tiles, steel and glass.
Creates a secure bond with subsequent coatings and water-based thin-bed mortars. 

OTTOFLEX® color paste 10 g
Characteristics
For coloring liquid film
application areas
We recommend 1 bag of color paste a (10g) for coloring 20 kg of liquid film, i.e. for 90 kg approx. 5 bags. 

OTTOFLEX® liquid film The composite seal
Characteristics
Butadiene-styrene-based synthetic resin dispersion
Sealing against moisture
Compatible with commercially available tile adhesives and solvent-free coatings
Compatible with OTTO silicone sealants
Ready to use, easy to process by rolling, brushing or troweling
Very short drying time of 2 to 3 hours
High crack bridging
Plasticizer-free, solvent-free
Store and transport frost-free
Corresponds to building material class B2 "normally flammable" according to din 4102-1
application areas
Composite sealing in damp rooms and wet rooms under ceramic coverings and natural stone using the thin-bed process
Suitable for a wide variety of substrates, such as gypsum, gypsum plasterboard, gypsum fiber, plaster, (aerated) concrete, masonry, stone, screed 

OTTOFLEX complete sealing set with 7 kg liquid film
sealing system
For indoor use OTTO-Chemie complete sealing set under ceramic coverings in the bathroom and shower Product features:
Solvent-free, liquid surface waterproofing that can be applied with a roller, brush or trowel, incl.
associated primer and sealing sleeves/sealing tape for damp and wet rooms.
For wet areas with non-pressing water in residential buildings, e.g. e.g. bathroom, shower, kitchen etc.
On moisture-sensitive substrates, on mineral absorbent substrates.
Waterproof, deformable, crack-bridging.
Ready to use, all relevant individual components included in the set.
Areas of application:
inside, floor, wall
Delivery form:
1 kg primer
7 kg liquid film and 1 bag of color paste (10g)
2 wall sealing sleeves 15x15
5 meters OTTOFLEX object sealing tape
1 piece of inner corner
Consumption approx. 1.2 kg per sqm 

OTTOFLEX complete sealing set with 12 kg liquid film
sealing system
For indoor use OTTO-Chemie complete sealing set under ceramic coverings in the bathroom and shower
Product features:
Solvent-free, liquid surface waterproofing that can be applied with a roller, brush or trowel, incl.
associated primer and sealing sleeves/sealing tape for damp and wet rooms.
For wet areas with non-pressing water in residential buildings, e.g. e.g. bathroom, shower, kitchen etc.
On moisture-sensitive substrates, on mineral absorbent substrates.
Waterproof, deformable, crack-bridging.
Ready to use, all relevant individual components included in the set.
Areas of application:
inside, floor, wall
Delivery form:
2 kg primer
12 kg liquid film and 1 bag of color paste (10g)
2 wall sealing sleeves 15x15
10 meters OTTOFLEX object sealing tape
2 pieces of inner corner
Consumption approx. 1.2 kg per sqm 

OTTOFLEX complete sealing set with 20 kg liquid film
sealing system
For indoor use OTTO-Chemie complete sealing set under ceramic coverings in the bathroom and shower
Product features:
Solvent-free, liquid surface waterproofing that can be applied with a roller, brush or trowel, incl.
associated primer and sealing sleeves/sealing tape for damp and wet rooms.
For wet areas with non-pressing water in residential buildings, e.g. e.g. bathroom, shower, kitchen etc.
On moisture-sensitive substrates, on mineral absorbent substrates.
Waterproof, deformable, crack-bridging.
Ready to use, all relevant individual components included in the set.
Areas of application:
inside, floor, wall
Delivery form:
5kg primer
20 kg liquid film and 1 bag of color paste (10g)
2 wall sealing sleeves 15x15
20 meters OTTOFLEX object sealing tape
4 pieces of inner corner
Consumption approx. 1.2 kg per sqm 

OTTOFLEX® sealing slurry The composite seal
Characteristics
One-component flexible composite sealing - quick-hardening
Bridging cracks
Very easy to process
Crack-free curing
Waterproof and open to vapor diffusion when cured
Frost and aging resistant when cured
Corresponds to building material class B2 "normally flammable" according to din 4102-1
application areas
For indoor and outdoor use
Flexible composite sealing under ceramic coverings and natural stone in damp rooms and wet rooms
Flexible composite sealing under ceramic coverings and natural stone on balconies, terraces and arcades (not over used rooms) with a gradient = 1.5%
Sealing of building components in contact with the ground against soil moisture and non-pressing water, e.g. external basement walls and retaining walls
For sealing swimming pools and water tanks made of solid construction indoors and outdoors, approved for water depths of up to 4 m
Suitable for substrates with sufficient strength such as plasterboard, gypsum fiber, screed, heated screed, concrete, masonry, aerated concrete and plaster of mortar groups II and III
In areas subject to heavy wet wear, in accordance with stress classes A and B in the building regulations list

Safety notice:
Keep out of reach of children.
Always read the label and product information before use.

The premium hybrid adhesive OTTOCOLL® M 500 is the ideal choice for elastic and tension-balancing bonds between a wide variety of materials. Due to its very good adhesion and processing properties, the adhesive can be easily used on many surfaces without pre-treatment with a primer. Bonding is even possible on damp surfaces. When cured, the adhesive is also extremely water-resistant. Primer before applying acrylate coatings and commercially available solvent-free tile adhesives on gypsum plasterboards, gypsum and lime-gypsum plasters, gypsum floorboards, gypsum fiber boards, concrete, aerated concrete, sand-lime brick, bricks, masonry, plasters, screeds, anhydrite and mastic asphalt screeds, building boards, fillable and self-leveling floor leveling compounds Suitable for a wide variety