Description
XCZU15EG MPSOC Development Board 14-Layer PCB with FMC HPC Used for Software Defined Radio Purpose
Description:
The board is made of 14-layer PCB. The board is TU872 and its thickness is 2mm.
Boot Mode:
* The on-board USB-to-JTAG module enables JTAG boot
* Dual-way Quad-SPI flash memory (online programming via JTAG)
* Boot from TF/SD card (programming via card reader)
Memory:
* 64-bit 4GB DDR4 connected to PS
* PL is connected to 1200MHz/2400Mbps DDR PL 512MB DDR4 component memory (256Mbx16 device), i.e. 1GB 16-bit
* 8KB IIC EEPROM
* Dual 64MB Quad SPI flash memory can be used for booting
* TF/SD card slot
* On-board EMMC 32G memory
* 512G M.2 SATA SSD
Control & I/O:
* 4 PL buttons
* 4 PL DIP switches
* 6 PL LEDs
* Start the mode DIP switch
* Keys for global reset
Extended Connectors:
* 2 x FMC-HPC (FMC-LPC compatible) connectors (16 GTH transceivers, 64 differential user-defined signals)
* 1 x FMC-LPC connector
* 2 x PMOD PL external expansion ports
* 1 x PMOD PS external expansion port
Communication Networks:
* 10/100/1000Mb/s RGMII communication. Series GMII interface supports 1Gb/s SGMII interface
* QSFP ports can be divided into four separate optical ports. The rate is greater than 10Gbit/s
* Two PS UART-to-USB bridges
* Two PL UART-to-USB bridges
* RJ45 Ethernet connector
* DP monitor interface
* USB HOST interface can be connected to a USB drive and a keyboard and a mouse
Clock scheme:
* CDCM6208 programmable clock, the following clocks are supplied:
33.333M as the input clock for PS.
26M as a clock for the USB 3.0 interface.
27M is used as the clock of the DP port.
125M as a clock for SATA.
74.25M and 100M as user PL clocks
* In addition, there are two specialized differential crystal oscillators:
156.25M is provided with GTH clock for 10G optical port communication.
200M is provided to the PL and can be used as a reference clock for PL DDR4 or as a clock for other PLs.
Package Included:
* 1 x Development board motherboard
* 1 x 512G M.2 SATA SSD
* 1 x 12V power adapter
* 1 x RJ45 Gigabit Ethernet cable
* 1 x 32G TF card
* 1 x SD/TF card reader
* 2 x MICRO USB cables
Packaging Details:
* G.W.: 0.5kg
Description:
The board is made of 14-layer PCB. The board is TU872 and its thickness is 2mm.
Boot Mode:
* The on-board USB-to-JTAG module enables JTAG boot
* Dual-way Quad-SPI flash memory (online programming via JTAG)
* Boot from TF/SD card (programming via card reader)
Memory:
* 64-bit 4GB DDR4 connected to PS
* PL is connected to 1200MHz/2400Mbps DDR PL 512MB DDR4 component memory (256Mbx16 device), i.e. 1GB 16-bit
* 8KB IIC EEPROM
* Dual 64MB Quad SPI flash memory can be used for booting
* TF/SD card slot
* On-board EMMC 32G memory
* 512G M.2 SATA SSD
Control & I/O:
* 4 PL buttons
* 4 PL DIP switches
* 6 PL LEDs
* Start the mode DIP switch
* Keys for global reset
Extended Connectors:
* 2 x FMC-HPC (FMC-LPC compatible) connectors (16 GTH transceivers, 64 differential user-defined signals)
* 1 x FMC-LPC connector
* 2 x PMOD PL external expansion ports
* 1 x PMOD PS external expansion port
Communication Networks:
* 10/100/1000Mb/s RGMII communication. Series GMII interface supports 1Gb/s SGMII interface
* QSFP ports can be divided into four separate optical ports. The rate is greater than 10Gbit/s
* Two PS UART-to-USB bridges
* Two PL UART-to-USB bridges
* RJ45 Ethernet connector
* DP monitor interface
* USB HOST interface can be connected to a USB drive and a keyboard and a mouse
Clock scheme:
* CDCM6208 programmable clock, the following clocks are supplied:
33.333M as the input clock for PS.
26M as a clock for the USB 3.0 interface.
27M is used as the clock of the DP port.
125M as a clock for SATA.
74.25M and 100M as user PL clocks
* In addition, there are two specialized differential crystal oscillators:
156.25M is provided with GTH clock for 10G optical port communication.
200M is provided to the PL and can be used as a reference clock for PL DDR4 or as a clock for other PLs.
Package Included:
* 1 x Development board motherboard
* 1 x 512G M.2 SATA SSD
* 1 x 12V power adapter
* 1 x RJ45 Gigabit Ethernet cable
* 1 x 32G TF card
* 1 x SD/TF card reader
* 2 x MICRO USB cables
Packaging Details:
* G.W.: 0.5kg
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
Am 29.04.2024 hat der Verkäufer die folgenden Angaben hinzugefügt: