About this item



a

How To Install The Microphone

1.According to the usage habit, select the left or right microphone fixed socket, insert

2. Plug the microphone signal power cord into the corresponding port

3. Screw the screw into the retaining socket of the microphone,This step holds thmicrophone in place and prevents it from rotating,This step is important for the stability of the microphone,Buyers complain,The mouth mic spins around loosely.The important reason is that the screws are not fixed properly

A good helper to protect your hearing

A Good Helper to Protect Your Hearing

1. Runs on 2 AAA Batteries (not included) with waterproof battery cap.

2. This Version not Only has Communication Function, but also this headset has electronic active noise reduction and sound pickup technology,( sound collection function / soundproof function / hearing protection function),

3. When the ambient noise exceeds 80 decibels,this series of tactical headphones has a very obvious noise reduction effect, which is a good protection of our hearing!

Hdlsina Tactical Shooting Headset Hearing Protection

THE RATE OF HEARING IMPAIRMENT CAUSED BY NOISE:

80 DECIBEL:Upper limit of human ear comfort

90 DECIBEL:Many countries defined as occupational exposure limits

95 DECIBEL:Noisy bar, chainsaws slicing through wood

100 DECIBEL:Pneumatic drill, compression hammer strike sound

110 DECIBEL:Damage to the auditory system

120 DECIBEL:Propeller planes, rock concerts

125 DECIBEL:high pressure air rifle

130 DECIBEL:Jet plane takes off,pistol

140 DECIBEL:The European Union defines the threshold for total hearing loss

ARC Rail Adapter Function

Flapping Up or Down

Flip to the back of the helmet

with management cable latches

Come With Two Adapters

Flapping Up or Down

The spring and Rotation of brackett mounting design,the bracket arm can be flapping up or down,When not in use,

Flip to the back of the helmet

It can be folded behind the helmet for storage

with management cable latches

The tactical helmet connection arm comes with a buckle for the management wire,

The headphone cable can be stored and organized to prevent the messy headphone cable

Come With Two Adapters

Compatible with both OPS Core and Team Wendy M-LOK Rails

Tactical headphone wire fixed display

Tactical headphone wire fixed display

The attached double-sided hook and loop tape can match the helmet hook and loop and the tactical headphone wires can be arranged to reduce the clutter of the wires

Tactical helmet  mode

Tactical helmet and ARC helmet rail adapter application

The rail adapter is compatible with the full range tactical FAST helmets, ACH helmets, MICH helmets with OPS Core ARC rail on the sides

This ARC helmet rail adapter can be rotated 360°,The card position of ARC Rail Adapter Accessories on the headset can also be rotated. the bracket arm can be easily extended and shortened,Adjust to a comfortable position

With U94 type headset PTT

Tactical headset +PTT+ intercom

Application of PTT 2 pin plug and intercom

NATO standard 7MM plug

METAL CLIP

Combined application of tactical headset +PTT+ intercom

With U94 type headset PTT,Fit standard version plug Adapter Mobile 2 Pin 7.0mm Plug , fits for Kenwood 2 pin radio.theTactical headset has the NATO standard 7MM plug, It should work work perfectly.

Application of PTT 2 pin plug and intercom

Fits for Kenwood 2 pin radio

The NATO standard 7MM plug

theTactical headset has the NATO standard 7MM plug, It should work work perfectly.

METAL CLIP

Standard U94 type headphone connector with Serrated metal clip clip, the clip has a good bite force for attaching to clothes or MOLLE webbing strap tightly.