CUBE BABY AC
Preface
CUBE BABY AC is a portable and multifunctional electrical acoustic
guitar effector. It has 3 editable presets, the users also can customize
effectors chain and save.
CUBE BABY AC has built-in battery, it has 3-band EQ, Compressor, automatic
real time ANTI-Feedback Chorus, Tremolo, Delay, Reverb,8 IR slots and a Tuner.
Beside, it support mobile phone recording jack, BT, and computer sound
card. It integrates a variety of function, it is easy-carry has excellent
sound!
It could be a good partner of your guitar.
The Power Supply
l lt is equipped
with built-in battery for power supply,which can last for 6 hours after full
charge.
l lt can charge
with the 5V adapter or the power bank.
l When the battery
run low,you can use the DC 5V/2A adapter,you need 2 hours to fully charge the
battery.
Effectors Chain
Tuner→EQ →Compressor→ANTI Feedback→Tremolo/Chorus→ Delay/Reverb→IR CAB
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
Rear Panel
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
①IN:1/4"MONO audio input jack.
②Power switch.
③ USB jack: Use to charge the battery/
the CUBE BABYAC can be sound card of computer/you can edit 3 groups of presets
on computer/ you can import the IR on computer.
④ Audio output jack: It support mobile phone
recording.
⑤ Earphone output.
⑥ OUT: 1/4"MONO audio output jack.
Front Panel
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
①TREB: Treble knob.
②MID: Middle knob.
③BASS: Bass knob.
④COMP: Compressor knob.
⑤ANTI FB: ANTI-Feedback knob.
⑥MOD: CHORUS/TREMOLO.
⑦SPACE: Adjust the radio of wet and dry of
REVERB/DELAY.
⑧TIME: Adjust the feedback speed of echo repeats of
REVERB/ DELAY.
⑨IR CAB: 8 IR slots.
⑩VOLUME: Volume knob.
⑪BT indicator.
⑫Charging indicator.
⑬C footswitch.
⑭B footswitch.
⑮A footswitch.
⑯3 indicators.
Effectors Module
Attention: Please make sure that CUBE BABY AC is in LIVE mode,then you
can listening-test the 1-6 items of effectors below.
1. EQ editor
l
TREB knob.
l
MID knob.
l
BASS knob.
2.COMP
l COMP: Compressor knob.
3.ANTI FB
l ANTI FB: ANTI-Feedback
knob,it provide automatic real time anti-feedback,up to 8 high-precision notch.
4.MOD
l MOD knob: the left half
circle is used for CHORUS,the right half circle is used for TREMOLO.When the
knob is at middle,the indicator turned off,it means the MOD has been turned
off.
5.SPACE
l SPACE knob: The left half
circle is used for REVERB,the right half circle is used for DELAYWhen the SPACE
knob is at middle,the SPACE and TIME indicators will turned off at same time,it
means the SPACE module has been turned off.
l TIME knob: Adjust feedback
speed of echo repeats of SPACE.
6.IR CAB
l IR CAB knob: Select the types
of IR.A total of 9 slots,the first slot means the IR has been turned off,the
2-9 slots are 8 types of IR.
SLOT |
IR NAME |
1 |
Base on The IR has been turned off |
2 |
Base on Mart 45 Piezo 3C |
3 |
Base on Acoustic2-Impulse |
4 |
Base on Wurlitzer 1 |
5 |
Base on Mart 45 Soundhole 5c |
6 |
Base on Soldano 2inch cap-dc |
7 |
Base on On Axis grille |
8 |
Base on Taylor 314ce-Soundelux |
9 |
Base on Pro Jr floor |
l You can import
the IR files to CUBE BABYAC on computer.The previously IR will overwritten with
the current IR.
7. TUNER
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
In TUNER mode,these six knobs represent the six strings of the guitar.
When you tuming the string,the corresponding knob indicator will light on.
In TUNER mode,when you turning the string,these three knobs show the
pitch:
l The indicator
lighting up means the string is pitching too low;
l The indicator
lighting up means the string is at the correct pitch;
l The indicator
lighting up means the string is pitching too high.
Press and hold the B+C footswitchs at the same time for 2 seconds to
enter TUNER mode.
8.BT
l This product
supports BT,you can press and hold the "A+B" footswitchs at the same
time for 2 seconds to tum on/off BT.When the indicator lighting up blue,it
means the BT has been connected, then your phone can paly music to the CUBE
BABY AC.When the indicator flashing blue,it means that BT is turnning on,but
not in connection.
9.Mobile Phone recording
l This product
supports phone recording function,you can use the recording cable to connect
the Phone and CUBE BABYAC,then you can use your Phone to get a high quality
recording.
LIVE/PRESET/EDIT Mode
l
CUBE BABY AC has three operation modes,LIVE mode is
real-time performance mode,EDIT mode is use for edit the three presets,PRESET
mode is the most common state for performance.The initial power-on default
enters PRESET mode, tap the combination nail "B+C" for LIVE mode,or
tap the combination nail "A+B" for EDIT mode.
l PRESET mode is
the most normal playing state,you can use LIVE or EDIT to edit and save three
presets,then Three presets can be used by free footswitchs conveniently in
PRESET mode.
l In LIVE
mode,visual operations can be performed,knobs timbre effect is what you see is
what you get,it is suitable for you to customize a effectors chain.You can use
the knobs to improvise the timbre when you performing.
l In EDIT mode,you
can fine-tune and edit 3 groups of presets, better for contrast with other
preset's tones. A. Function Introduction of PRESET mode.
A. Function
Introduction of PRESET mode.
PRESETS |
EFFECTORS CHAIN |
A Footswitch |
EQ+ANTI FB+REVERB+Mart 45 Piezo 3C |
B Footswitch |
EQ+ANTI FB+CHORUS+Acoustic2-Impulse |
C Footswitch |
EQ+ANTIFB |
l In PRESET
mode,the VOLUME knob is the final output volume value,you can listen and use
the three presets in real time,but you cannot use knobs to edit timbre.The
A/B/C footswitchs represent 3 presets,when the preset had been selected,the
current footswitch- indicator flashing.If all three indicators are off,the
device is in Bypass.
B. Function Introduction of LIVE mode.
l When enter LIVE
mode,the default final output volume value in this mode is80%,the VOLUME knob
is use for adjust the level of current effectors chain.
l In LIVE
mode,theA/B/C footswitchs can use to open/close the corresponding effect
module,the corresponding footswitch-indicator is flashing/went off.Users can
customize the effectors chain,then press and hold the A/B/C to save.
l In LIVE mode,the
knob lights have only 2 states:lighting on/went off.If the knob light is off,it
means that the effect of this knob is not on;lf the knob light is on,it means
that the effect has been turned on,and the knob timbre effect is what you see is
what you get.
C.Function Introduction of EDIT mode.
l Switch to EDIT
mode when you tap A+B,the machine will retain the data in the corresponding
knobs before switching.
l In EDIT mode,the
machine always retain the output volume value before switching to EDIT.
l The knob lights
have only 3 states:lighting on/went off/flashing.lf the knob light is off,it
means that the effect of this knob is not on;lf the knob light is on,it means
that the effect has been turned on,and the knob timbre effect is what you see
is what you get;lf the knob light flashing,it means that the effect has been
turned on,but the knob timbre what you get is diffident from what you see.
l After you tum the
knob,the flashing knob light will become lighting on,The previously data will
overwritten with the current knob value.When the knob light lighting on,the
knob timbre effect is what you see is what you get.
l In EDIT mode,the
machine always retain the output volume value before switching,the VOLUME knob
is use for adjust the level of current effectors chain.
l After editing the
effectors chain,then switch to PRESET mode,the VOLUME knob become the final
output volume value.Therefore,it is recommended that after exiting EDIT
mode,users immediately turn the volume knob to the position before entering
EDIT mode.So that you can restore the output volume value of the previous
performing.
l In EDIT mode,the
A/B/C footswitchs can use to open/close the corresponding effect module,the
corresponding indicator light is flashing/went off.Users can fine-tune and edit
3 groups of presets, then press and hold the A/B/C to save.
How To Customize A Effectors Chain
Let's try to customize a effectors chain similar to Preset“A”.
1. When CUBE-BABY AC is turned on,tap the "B+C" to enter the
LIVE mode.Then you need to tum off all the effectors,so that all the knob
indicators had been turned off(eccept theVOLUME knob).Next step,you can turn
the VOLUME knob to the value you like.
2.Tap the C footswitch to turn on the ANTIFB+EQ mudle,tum the TREB knob
to the 9 o'clock position,turn the MID knob to the 9 o'clock position,turn the
BASS knob to the 11 o'clock position,turn the COMP knob to the 8 o'clock
position,turn theANTI FB knob to the 12 o'clock position.
3. Tap the B footswitch to tum on the MOD+SPACE mudle.We don't need the
MOD,so let's turn the MOD knob to the 12 o'clock position. Then,let's turn
theSPACE knob to 11 o'clock position to turn on the REVERB effector.Next
step,turn the TIME knob to 2 o'clock position.
4. Tap the A footswitch to tum on the IR mudle.Turn the IR CAB knob to
the 2th slot,so we had select the "Mart 45 Piezo 3C".
5. Then let's adjust the level of current effectors chain,turn the
VOLUME knob to the value you like.
6. At this time,we had customized a effectors chain,then let's press
and hold the A footswitch for 2 second to save it to PRESET A.
7. Let's tap the "B+C" to enter the PRESET mode.You can use
the new PRESET A now.
The Software Interface
1.IR EDITOR
①IR files searching button:you can use it to find the IR on your
computer.
②IR files display interface:here is the IR files you had selected,you
can click and listen it.
③Microphone distance simulator:you can adjust the distance of microphone
to speaker.When the distance closer,the sound louder, when the distance
farther,the sound lower.SO,what you need to attention is:When the distance
is100%,you couldn't hear the voice.
④IR saving location:you can use it to select the 1-8 locations of the IR
slots of CUBE BABY AC.
⑤Save button:click this button to save.
⑥The IR Factory reset option.
⑦Click this button to Factory reset the parameters of 3 PRESETS.
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging box.)
2. PRESETS PARAMETERS EDITOR
①Select the Preset you need to edit.At this time,if the software and
CUBE BABY AC are in the same Preset,you can hear the real-time sound of
editing.
② Adjust the level of current effectors chain.
③ Adjust the IR.
④ Adjust feedback speed of echo repeats of SPACE.
⑤ SPACE effector editor:0-13 is use to edit the REVERB,14-17 is use to
turn off SPACE,18-31 is use to edit the DELAY.
⑥MOD effector editor:0-6 is use to edit the CHORUS,7-8 is use to tum off
MOD,9-15 is use to edit the TREMOLO.
⑦Adjust ANTI-Feedback.
⑧Adjust the Compressor.
⑨Adjust the Bass.
⑩Adjust the Middle.
⑪Adjust the Treble.
⑫Save button: click this button to save the PRESET.
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
Technical Parameters
Input:Standard 1/4" jack MONO/TS
Output:Standard 1/4" jack MONO/TS
Sample Rate:48KHz/24bit
Battery Capacity:780mah
Size:161(L)X57(W)X17.5(H)mm
Weight:260g
Attachment:Charging Cable, Recording Cable
Seller Policy
Postage & Delivery
All products will be checked carefully and packed in good condition
before shipping.
Products are located in the warehouse in China.
Products will be received within 7-13
business days, If you are in the USA or
North America.
If you are in the Europe, you
will receive it within 7-19 business days.
If you are in the Asia, you will
receive it within 7-12 business days.
If you are in the South America,
you will receive it within 13-50 business days.
If you are in the Other regions and
countries, you will receive it within 13-50
business days.
About order handling time, usually we ship in 1-5 business days after receiving the clearing
payment. We do offer Expedited shipping methods.
Note:
Due to shipping policies restrictions, our shop is unable to ship to
Alaska, Hawaii, Puerto Rico, US Protectorates and APO/FPO address.
Your satisfaction is our aim!
Payment Policy
We gladly accept payment methods eBay approved.
Both of us must comply with the rules and requirements of the eBay. We
want to make sure the transaction is legal and compliant.
If you have any requirements or requests, please contact via eBay
message.
Your satisfaction is our aim!
(After-Sales Service) Return and Exchange
If the product you receive has quality problems, please contact us in
time, we will refund you or replace the product after confirmation.
Product Assurance 30-day unconditional return policy:
①Please keep the product packaging intact and undamaged, the product in
good condition and not affecting secondary sales, and send photos and videos of
the product to the customer service for confirmation.
②For returns caused by non-product quality defects, the buyer shall bear
the shipping costs.
③For returns caused by product quality defects, the round-trip shipping
costs shall be borne by the buyer. Half-year warranty policy.
④The shipping
costs incurred for repaired products shall be borne by the buyer.
⑤If the product
problem is caused by the buyer, the buyer shall bear the cost of parts and
other related maintenance costs.
Feedback
If you have any problems, Please don't give us a negative comment
without reasonable communication, please contact us in time. We’ll deal with
your problems and demands as soon as possible, to help you save money, give you
the best service quality and attitude, you can also buy High-Quality products
from our store!
The most important of all, Your Satisfaction is our aim!