Schomburg AQUAFIN-2K/M-PLUS
Crack-bridging, mineral sealing slurry

Seamless and jointless, flexible, crack-bridging sealing
suitable for all load-bearing, standard building surfaces
Adheres to damp surfaces without primer
diffusion-permeable, frost-, UV- and aging-resistant
resistant to de-icing salt
very low emissions EC1 PLUS according to GEV-EMICODE
Building sealing in accordance with din 18533 and din 18535
Composite sealing (AIV) according to din 18531, dindin 18535,din EN 14891
CM 01 P according to din EN 14891
improved crack bridging even at low temperatures (-5 °C)
resistant to contact with chlorine water
resistant to water that attacks concrete in accordance with din 4030

Areas of application:
Building sealing in contact with the ground, base sealing and cross-sectional sealing in and under walls
according to din 18533 for water impact classes W1.1-E, W1.2-E and W4-E.
Subsequent building sealing according to WTA information sheet 4-6 against soil moisture,
non-pressurizing water and pressurized water (with appropriate construction).
Sealing in the composite for water impact classes W0-I to W3-I without chemical exposure
din 18534 and ZDB leaflet “Sealing in composites (AIV)”.
Outdoors as a seal on balconies, loggias etc. according to din 18531-5.
Sealing of containers and basins up to water impact class W2-B according to din 18535, up to 10 m.
AQUAFIN-2K/M-PLUS is very low in emissions according to GEV-EMICODE, which is usually positive
Assessments as part of building certification systems according to DGNB, LEED, BREEAM, HQE.
Highest quality level 4, lines 7 and 8 according to the DGNB criterion “ENV 1.2 Risks for the local environment”.

Building sealing:
Building sealing of wall and floor surfaces in contact with the ground for new buildings and existing buildings
on components made of concrete or masonry.
Sealing against water pressing from the inside of container structures (e.g. process water tanks, waste water tanks).
Horizontal sealing in and under walls against capillary rising moisture.
Sealing transitions to floor slabs made of concrete with high water penetration resistance (Wu-concrete) and base seals.
Application on old, firmly adhering bitumen substrates.

Consumption:
approx. 1.75 kg/sqm per mm layer thickness

Safety notice:
Keep out of reach of children.
Always read the label and product information before use.

Building sealing in contact with the ground, base sealing and cross-sectional sealing in and under walls Sealing of containers and basins up to water impact class W2-B according to din 18535, up to 10 m. AQUAFIN-2K/M-PLUS is very low in emissions according to GEV-EMICODE, which is usually positive Assessments as part of building certification systems according to DGNB, LEED, BREEAM, HQE. Highest quality level 4, lines 7 and 8 according to the DGNB criterion “ENV 1.2 Risks for the local environment”. Building sealing of wall and floor surfaces in contact with the ground for new buildings and existing buildings Sealing against water pressing from the inside of container structures (e.g. process water tanks, waste water tanks). Sealing transitions to floor slabs made of concrete wit