• 6Port 100Mbps Switch :This switch has 6 ports that can handle up to 100Mbps of traffic, making it perfect for high-speed networks.
• 4 PoE+2 UpLink :With 4 PoE+2 UpLink ports, this switch can provide power to IP cameras and other devices that require it.
• Internal Power :The switch has internal power, which means it can provide power to devices even when the power supply is cut off.
• Full-Duplex & Half-Duplex Communication Mode :The switch supports both full-duplex and half-duplex communication modes, allowing for flexible and efficient network traffic.
TengFei POE Switch 6Port 100Mbps Switch 4 PoE+2 UpLink With Internal Power Office Home Network Hub for IP Camera with Phone
Product Introduction：
4 X POE Ports
The power supply port can detect and identify powered devices that comply with the IEEE802.3at/af standard.The overall poweris 52W，and the maximum power of a single port is 30W
Plug and Play
All ports support Auto MDI/MDI-X function, autonomous learn-ing and updating of MAC addresses, IEEE802.3X full duplex flow control and Backpressure half duplex flow control, plug andplay, without the need for separate settings.
AI & Extends
Up to 250 meters long-distance transmission, Al algorithm automatically optimizes the network and stabilizes the network signal transmission status. When the POE port device crashes or abnormally interrupts, it will intelligently restart and note, reducing manual troubleshooting.
F&Q
1.The switch I chose is gigabit, why is the internet speed still very slow?
Network speed and various factors such as routers/cables/devices
Correlation, any one factor will affect the theoretical speed. For example, your fiber optic/router only supports 100M/Mbps, and the gigabit switch can only be limited to 100Mbps. It is recommended to check the actual situation of each device.
2.Monitoring equipment often drops or goes blank?
The general influencing factors include the following
① The quality of the network cable: Generally, it is selected to be of Class 5 or Class 6 quality
A high-quality network cable.
② Interface wire sequence: Always follow the wire sequence of 568B or 568A
Production.
③ Crystal head: Choose high-quality crystal heads and follow the
Standard network cable production method.
④ Other factors: aging of network cables, squeezing, or electromagnetic interference
The interference is severe, and the network cable distance is too long.
3.Do I need to set an IP address?
No, automatic IP address, plug and play
4.Does it have WIFI function?
No! The switch does not have wireless signal transmission function. If you want to achieve large-scale wireless coverage, you can use the switch, connected wireless AP or router to achieve larger wireless coverage.
5.Is it true that the more ports on a switch, the faster the speed?
No, ports only represent the number of connections that can be made. The more ports there are, the more suitable a solution for homes or small office spaces, as a backup for future equipment additions. The speed mainly depends on the port speed and backplane bandwidth, the higher the better.
6.Is it possible to choose gigabit, so that all the devices I connect to can reach gigabit speed?
In theory, if only one device is connected to the network, your speed is at full speed. If there are more devices connected at the same time, then the total bandwidth rate is evenly divided, so the speed cannot always be full speed.
7.What is the difference between POE power supply and regular switches?
POE switches not only provide the transmission function that ordinary switches have, but also provide power supply to devices on the other end of the network cable, saving the trouble of wiring and connecting power to devices separately. For example, if you install a monitoring device at the entrance of your house, you can directly connect a network cable without the need for additional power supply.
8.My receiving devices have different power levels. Can I connect them simultaneously?
All powered devices that comply with the IEEE 802.3af/at standard can be connected. AI intelligent power supply can intelligently detect the receiving equipment, thereby ensuring stable power supply. But a single port can support up to 30W. If you need to connect many devices, the total power should not exceed the overall output power of the selected product.
9.Under what circumstances does the hyper transfer function need to be enabled?
Extend is an ultra long transmission function, typically exceeding
It can be opened when a distance of over 100 meters is required.
The camera signal is disturbed or has insufficient strength, causing
Under unstable conditions such as image transmission lag and intermittency
Can be opened.
10.Can POE switches be used as regular switches?
Yes.
11.Can non POE powered devices connect to POE switches?
Install a POE splitter for connection.
