79Ghz Millimeter Wave Radar BSD Blind Spot Detection System
 
Features:
1.Thank you for choosing the right blind spot monitoring and early warning system for commercial vehicles produced by our company. The product consists of a 79Ghz millimeter wave radar, an indicator light, a buzzer, a bracket and a connecting harness.
2.This system product provides early warning of dangerous targets in the adjacent lane on the right. The unique ability of 79Ghz millimeter wave radar to penetrate smoke, fog, and dust can realize all-weather and all-day service, real-time detection of objects in the signal area, and output alarm signals corresponding to the warning strategy.
3.In terms of the large vehicles such as vans, there is a large blind areas on the right side, which may cause endless traffic accidents.
4.This radar is used for 79GHz FMCW radar for side safety protection of arge cars and trucks.
5.The radar can detect and warn obstacles on the side of the vehicle, and effectively emove fixed obstacles such as fences and green belts, which can greatly improve the driving safety of heavy vehicles such as large trucks.

 

Product Function and Alarm Mode:
1.The radar is on after powering, and the self-inspection light turns on for 1 second and then goes out. As shown in the fiqure, when a target vehicle enters the side radar detection area, the vehicle's radar can detect the target and warns it with LED lights. In this state, the driver should stop dangerous driving behaviors such as turning right and changing lanes.
2.Radar has two working modes: low-speed mode and high-speed mode:
Low speed mode: When the driving speed of the vehicle is 0-18km/h, it will alarm all targets within the detection range no matter it is stationary or in motion.
High-speed mode: When the driving speed of the vehicle is greater than 18km/h, it only alarms the moving targets with a moving speed of greater than 10km/h.
 

Alarm mode:
1. If there is no right turn signal: the indicator light will always be on.
2. If there is a right turn signal: the indicator light will be flashing, and the buzzer beeps once (only beeps once for a single induction).

 

Specifications:
Operating Voltage:12-24V
Dperating Frequency:76-81Ghz
Operating Temperature:-40℃~+85℃(-40°F+185°F)
Power Consumption:＜5W
Waterproof Level:IP67
Distance Resolution:0.5M(1.64ft)
Measuring Accuracy:0.1M(0.32ft)
Detection Range:
High-speed mode: 0.2-3.5M(0.65-11.48ft) horizontal direction, -7-7M(-22.96ft-22.96ft) In vertical direction.
Low-speed mode: 0.2-1.5M(0.65ft-4.92ft) horizontal direction, -7-7M -7-7M(-22.96-22.96)in vertical direction.

 

Packing List:
1*79GHz millimeter wave radar
2*Bracket
1*Reminder light
1*Buzzer
1*Radar extension cable (plug in radar for use,5M(16.4ft).
1*Wire (Connect the positive and negative poles of the power supply,reminder light extension cord 4M(13.12ft) and buzzer extension cord 1.5M(4.92ft)
1*Instruction

 

Installation Notes:
1.Radar installation height: 0.6-1.2 meters(1.96ft-3.93ft) from the ground.
2.Radar installation angle: horizontal and vertical to the ground; parallel to the vehicle body (it can be ilted 0-5 degrees toward the rear of the vehicle, which does not affect the forward detection distance, but will increase the backward detection distance).
3. The radar outlet is facing downwards.
4.The radar is installed on the outer right side of the vehicle body, and the surface of radar sianal cannote covered hy metal materials.

 

Note:
1.Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the picture.
2.Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order.