Material: 210D Oxford cloth;
External size: 2.5x2.5x2.5m(98.43x98.43x98.43 inches),
Inner size: 2x2xH2.25m(78.74x78.74xH88.58 inches),
Door size: 1xH2m(39.37xH78.74 inches)
Come with inner blower, color can be changed by the Attached controller
Totally included:
Air blower *1
Remote controller *1
Power adapter *1
Ropes *1
Repair kits *1
Packing bag *1
Note:
Picture shown, which mainly lies in different light effect and computer monitor.
Constructions:
Step 1:Place and spread the photo booth onto a flat surface. Make sure that the top faces upwards and the zippers
on the lower bottom is closed beforehand .
Step 2:Connect the controller and power adapter before you connect the power.
Step 3:When everything is ready , connect the power. After 1-2 minutes , you will get a wonderful photo booth.
Please note that, never allow the photo booth to cover the air intake of the blower during blowing.
Step 4:If you are using the booth in an outdoor environment. Use the ropes in the package to fasten the booth
through the nylon tarpaulin webbing at the bottom of the booth.
Care instructions:
1. Do not open the package with sharp tools.
2. Place the booth on a smooth surface. It is best to spread a mat on the floor. This must be free of pointed objects
which could damage to the product!
3. Connect the power cable and blow the tent about 1-2 minutes until it blowing upright.
4. Please stay away from fireworks more than 6 meters.
5. Storage: clean the equipment with wet cloth and pack it well, -50 ~ +40℃ is appropriate.
6. Washing tips: soap and water is all we recommend you use, no chemicals.