Features:
·
Automatically and quickly finds correct breaker or fuse.
Quickly and easy identifies conditions of circuit socket.
MS5902-T× Works on 220V AC, MS5902-TB Works on 110V AC
Operating temperature: 0 ~ 50℃
Operation: Locating a Circuit Breaker or Fuse
Keep the pillar at left on the MS5902-T
Plug the MS5902-T into the receptacle.if there is a candescent light
fixture,please install a socket adapter before make sure the switch is
OFF.then plug the MS5902-T into the socket adapter,turn the switch on at
one time.(Socket adapter need purchase additional)
·
Go to the circuit breaker panel box.
Turn the MS5902-R on,the red LED is light.
Place the chapiter of the MS5902-R directly onto the circuit breaker or fuse.
Slide the chapiter of the MS5902-R down each breaker along both sides of
the panel .Then the MS5902-R will beep frequently as it denote the
relative signal strength.
Move the MS5902-R down each breaker once more. On the third pass,
the MS5902-R will beep ,the red LED will quench and the green LED will
light only at the circuit Breaker powering the MS5902-T.
Push the breaker off and check that the LED on the MS5902-T in the outlet is
off to confirm you have found the correct breaker or buse.
Test Socket Keep the pillar at right on the MS5902-T.
Please contradistinguish nameplate on the MS5902-T.
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |