HDMI CAT5 Extender
View our video by clicking here.
1080P @ 30M Lengths
480P @ 60M
Lengths
Perfect for long distance signal transmission, that would be
otherwise not possible.
What does the package include?
1 x Transmitter
1 x
Receiver
1 x Instruction Booklet
1 x Power
Source
The power source needs to be plugged
into the HDMI receiver, it is sometimes not required depending on how
much power there is already within your
set-up.
How do I set it up?
The HDMI CAT5
transmitter sits next to your source, such as a Blu-ray player and is connected
to the source by a HDMI cable. The receiver should be plugged into an output
device such as a HDTV, using a HDMI cable. Two runs of network cable, which can be up to 60 metres in length and should be wired in the 568B format are then be run in between the transmitter and
receiver.
Why
buy?
Our HDMI RJ45 extender allows
installers to take advantage of network cable for
connecting HDMI devices over long distances. Network cable is most commonly used
for computer networking, it is readily available and is very cheap. An RJ45 extender device such as this is a much more cost effective way to connect
devices over long distances without loss of signal quality, (HDMI cables could
only be run up to 15 metres, would require a lot of shielding and would be very
expensive). Network cable is relatively thin and flexible so it is easily
installed, for example through walls. It can be self terminated which allows for
tailored lengths to meet the exact requirements of any home or commercial
installation.
Distance – Actual usable
distance between the transmitter and receiver will vary on a number of factors
including strength of signal, quality of terminations and local sources of
interference. The use of FTP network cable when it is being run passed power cables is
recommended.
Signalling Rates – Signalling rates up to 2.25Gbits in support of 1080P display.
The units are well built and are compact. They have a durable
metal chassis.
Cables
– In order to produce the best
quality over long distances, we would recommend use of high quality cables,
running to and from the transmitter and receiver. If you need guidance, please email us. The use of pure copper CAT5e/CAT6 is recommended. |
 |
If this all seems a litle too technical for you, then why not get in touch with us...
We’re always happy to help and offer advice.
| |
 |
 |
|
Also works with many other products.
Other products which may interest you;
1) Loops 1 to 2 Splitter
2) Loops 2 to 8 Switch & Splitter | |
|
|
|
