New Season. New Standards. The new 2019, 9th Generation, Slumit CUB 2 (2 Berth) comes packing with design and performance tweaks.

Check out other FlashFrame™ tents in our range: INCA 1, GOBI 3 and GRIZZLY 4

This tough little beast is fast, light and strong. Popular with general campers, wild campers, bikers, festival goers, anglers or anyone seeking effortless, compact field accommodation. See the dimension diagram provided left for approx measurements.

The CUB 2 three season camping tent can be pitched (and packed) faster than an equivalent pole and sleeve tent thanks to the innovative all-in-one FlashFrame™ Pitch and Pack System. Up in a flash!

Born in 2008, the Slumit® FlashFrame™ is an exoskeleton frame system which enables the user to quickly pitch the inner and outer layers together, at the same time, in a matter of seconds. So no more pitching the inner tent first and then the outer through threading poles, which can be time consuming and especially problematic during wet conditions. The FlashFrame™ solves this problem!

The CUB 2 is a high spec two layer tent with a waterproof, UV+ 50 and flame retardant coated* (to CPAI-84 standard - see fire safety notice below) outer rainfly, and separate breathable inner sleeping area.

The rain-fly is waterproofed to a high 4000mm Hydrostatic Head (over 2.5x the British Standard for fabric to be deemed water repellant!).

The CUB 2 offers a self contained bug-free sleeping area (approx 200x135-170cm - see diagram for layout) suitable for 1-2 persons. A separate compact porch area suitable for campers needing sheltered storage for muddy boots and additional gear - keep your wet, muddy gear out of your sleeping cabin.

The internal Loft Storage Net and Side Storage Pockets (max load 2kg) are ideal for storing mobile phones, keys or other light weight accessories for easy access.

NEW 2019 additions:

• Redesigned inner tent for deeper internal sleeping space - *compared to pre-2019 models. Please see diagram
• Pano-View Outer Door PVC Window
• 4000mm HH Waterproof Outer Rain-fly (increased from 3000mm HH)
• UV+50 Coated Rain-fly
• “Open Fully” Inner Door with Corner Stuff Pocket
• Zippable rear wall electric cable access point to internal tent
• FlashPack™ Roll-Top Quick Stuff Carry Case
• Compatible with the Extra Guy Support Kit

COMPATIBLE ACCESSORIES (Sold separately unless advertised. Subject to availability):

FOOTPRINT GROUNDSHEET PROTECTOR (sold separately) - Increase the life of your tent and protect the underside of your integrated groundsheet from abrasion and general wear and tear by using a compatible FootPrint GroundProtector. Using a FootPrint Groundsheet Protector helps increase ground insulation too. The FootPrint Groundsheet Protector is tailored 10cm smaller than the integrated groundsheet to stop rain water channelling between the two layers. (sold separately)

CANOPY POLE SET (sold separately) - Transform your outer front door into a canopy awning using the Canopy Pole Set. Should be used on a still day (and ideally dry, to save your porch area from getting wet). Comes complete with foldable powder coated steel poles, guy ropes and pegs.

EXTRA GUY SUPPORT KIT (sold separately) - Reinforce your CUB tent using the Extra Guy Support Kit. Complete with 4 velcro banded guy ropes and heavy duty ground stakes. Fasten the velcro banded webbing to your FlashFrame™ system and guy out with the heavy duty storm pegs to offer increased stability and protection during windier conditions. Highly recommended if you are travelling away, or as a precaution should you experience unexpected inclement and breezier weather conditions. Ensure your tent is fully guyed out even on a still day. (sold separately)

WIND SAFETY NOTICE: Camping in windy conditions is not recommended and should be avoided for safety reasons. Check the recommended usage guidelines in the instructions. Always check wind and gust strength forecasts prior to your excursion. Winds may appear calm but gust strength may be very high. Wind and gusts can be extremely destructive and can damage temporary shelters such as tents and awnings not covered under warranty. Ensure your tent is fully guyed out even on a still day and check guy tensioners regularly. Pack the EXTRA GUY SUPPORT KIT (sold separately) should you be met with unexpected high winds and or gusts for additional support.

*FIRE SAFETY NOTICE: A flame retardant fabric does not certify that the fabric or tent is fire proof. Fabric will still burn if exposed to a naked flame. Flame retardant fabrics may only reduce the rate in which fabric will ignite and burn. Great care should always be taken when camping. Keep flame and heat sources away from the tent at all times. In the event of a fire, evacuate the tent immediately. Technical coatings (waterproofing, flame retardancy and UV+) will diminish over time and with usage. Always consult the fire safety information provided by the camp site for their site fire safety regulations.

*Also known as HH (Hydrostatic Head), a 1" diameter column is used to gauge the level of water resistance i.e. how many mm of water can be applied before it penetrates the material. NB. The HH polyurethane (PU) coating and resistance to moisture will weaken over the life of a tent. Our tents are coated at least x2.5 the British Standard for a material to be deemed waterproof. The British Standard is 1500mm.