Description
Features:
- As the people come at, the switch will automatically connects the circuit to charge the light; and as the people leave, it will disconnect the circuit, therefore, the light will be powered off.
- Applied the photosensitive control, the switch will work when the night comes or the light is dim.
- During the off-delay time, if people move, the switch will connect the circuit continuouslt until the peole leave.
- Used for automatically lightening in the lobby, corridor, basement, garage and etc.
- The light or electrical appliance controlled by this switch must be of power less than 60W.
Specifications:
- Voltage: AC110-250V (50/60Hz).
- Power: less than 0.016W.
- Temperature: minus 20 degrees to 50 degrees centigrade.
- Size: 46*43mm.
- Installation hole: 32mm.
- Length of wire: 21cm.
- Output type: positive direction.
- Controlling type: lamps.
- Controlling power: filament lamp, 60W; energy-saving lamp, 40W; LED, 15W.
- Off-delay time: 60seconds (more or less 30 percent).
- Net weight: around 25g.
Package Included:
- 1pcs Infrared Motion Sensor Switch Reference: 16070059001
==========================================================================
Features:
- 100% quality and Brand new.
- To turn on or off the light in day and night without manual operation
- Do not install the control unit in a place extremely darker in daytime or a place directly by lighting of turning - ON lamp
- Widely used: street light, highway, factories, garden, ports, airports, farm, parks, schools, and other places. Also can fit into solar lamps and lanterns, or cars, motorcycles, electric cars and other power supply voltage is 12V lamps and lanterns or equipment
- Rainproof performance, more suitable for outdoor
Specifications:
- Model:AS-20
- Input Voltage: DC/AC 12V
- Max Load Current: 10A
- Frequency:50-60Hz
- Two options:Adjustable sensitive.Non-adjustable photoreceptor
Package Included:
- 1 x Photo Control Sensor Reference:14030068
=====================================================================
Features:
- 100% quality and Brand new.
- To turn on or off the light in day and night without manual operation
- Do not install the control unit in a place extremely darker in daytime or a place directly by lighting of turning - ON lamp
- Widely used: street light, highway, factories, garden, ports, airports, farm, parks, schools, and other places. Also can fit into solar lamps and lanterns, or cars, motorcycles, electric cars and other power supply voltage is 12V lamps and lanterns or equipment
Specification:
- Model:AS-10 001Input Voltage: DC or AC 12V Max Load Current: 10A Size: 45x42x35mm Frequency:50-60Hz
- Model:AS-10 002 Input Voltage: DC or AC 24V Max Load Current: 10A Size: 45x42x35mm Frequency:50-60Hz
- Model:AS-10 003 Input Voltage:AC 110V Max Load Current: 10A Size: 45x42x35mm Frequency:50-60Hz
Package Included:
- 1 x Photo Control Sensor Reference:12120064
=====================================================================
Features:
- 100% brand new and high quality.
- It is a human inductive switch.
- Human inductive switch is an infrared detective controller, a switch which load is controlled by infrared detection method.
- Flexible and convenient to be used, users can install it in proper position according to real requirements.
Specifications:
- Material: Plastic
- Working temperature: Minus 20 degrees Celsius to 60 degrees Celsius
- Supply voltage: DC 5V,6V,12V,24V(optional)
- Output: 1 channel
- Sensing distance: 5-8 m
- Static power consumption: <1W
- Output current: < 8A
- Output power: 5V<40W, 6V<48W, 12V<96W, 24V<192W
- Size: 89*59*35mm(L*W* H)
Instructions:
- Firstly, connect the load wire, then connect the power wire, Please ensure that short circuit between connecting wire will not occur before turning the power on.
- Once it detects there is someone beyond the sensing range, the light brightens, someone lefts 10 seconds later, the light goes out.
- Should connect the signal output line and input line correctly.
Package Included:
- 1pc PIR Motion Sensor Switch Reference:12090033001
=================================================================
Features:
- 100% quality and Brand new.
- Automatically turn ON while detect people come and turn off while people leave
- Easy to install or replace existing switch
- The light sensitivity and delaying time can be adjusted
- Good solution for energy saving
- This is an Infrared technology based automatic sensor switch, which can be widely used in corridor, bathroom, basement, storage, garage, and other places of automatic lighting
Specification:
- Material: Plastic
- Color: White
- Voltage: AC 110V - 250V 50/60Hz
- Load Power: 3W to 200W
- Working Distance: Approx. 8 m / 26 feet
- Working Temperature: -20 to 50 degrees C
- Size (L x W x H): Approx. 85 x 85 x 35mm / 3.3 x 3.3 x 1.4 inch
Package Included:
- 1X Infrared switch Reference: 12030017001