Vehicle Fitment Information (Compatibility):
We include vehicle fitment Compatibility on many of our Powerflex listings but please note this information is to be used as a guide only. Our listings contain additional fitment notes and vehicle specific information in them, so please read all the information in the description before making a purchase. If you have any further doubt, please feel free to contact us for assistance. There are numerous factors that come into play when buying car parts, but with our knowledge and expertise, we will help you find the correct items you need. We accept a minimum of 30 day returns on all our products, but we do ask that items are returned to us in an unused and not fitted condition, with all the manufacturers packaging intact.
Powerflex Engine Snub Nose Mount for: Volkswagen Passat B5 Estate (1996 - 2005)
This listing is for 1 Powerflex Engine Snub Nose Mount with the Part Number: PFF3-220
This part replaces OE numbers: 8D0199339A, 8D0199339D, 8D0199339F, 8D0199339D and fits vehicles with a cylindrical engine mount spigot. For vehicles that use a D shape spigot, please use: PFF3-221.
To help identify the correct Powerflex Bush(es) you require, please refer to the location diagram further down the listing.
PFF3-220 is location 16 on the diagram below.
To be sure of the correct fitment, please use the further specification data above to assist you. If you are still uncertain please do not hesitate to contact us with either your UK Car Registration or Chassis Number and we will gladly help you identify the correct parts needed prior to ordering.
We ship Powerflex products to locations all over the world. Please contact us for a shipping quote if your country is not in the list.
PFF3-220 is location 16 on the diagram below.
We also sell various other Powerflex bushes for this model. These may include items such as wishbone bushes, anti-roll bar bushes, steering rack bushes, suspension bumpstops, rear axle bushes etc.
Bushes are one of the most highly stressed components fitted to a car. They undergo enormous strain, in the most arduous of conditions with no maintenance or lubrication. Conventional rubber bushes deteriorate with age allowing movement of suspension components and geometry. This can cause tyre wear, braking instability and poor handling and engine deflection.
Powerflex Bushes are made from a technologically advanced polyurethane plastic compound. This compound overcomes the common problem associated with harder bushes which is increased noise. By correct engineering the polyurethane compound bushes can be made 25-30% stiffer than rubber bushes, but with exactly the same noise absorption properties. Unlike old technology Poly bushes any increase in vibration / harshness felt through the vehicle is normally undetectable.
Please check our Ebay shop for other Powerflex bushes for this model.
We Also Sell Powerflex Bushes For Most Other Makes Of Car
C&R sell an extensive range of replacement and High Performance parts for your VW, Audi, Seat and Skoda. Stocking only the Highest Quality brands such as: K&N, Black Diamond, Goodridge, Piper, Kent, Jetex, Superpro, Powerflex, Prothane, Vibra Technics, Redline, Eibach, Koni and Weitec.We're not just "box movers" we are able to offer in depth technical advise relating to the product or we can provide a fitting service on most of the VAG Group parts we sell in our Nottingham workshop.
C & R Enterprises
The Volkswagen, Audi, Seat and Skoda Specialists
Since 1988 we have been repairing, modifying and selling parts for VAG Group cars
Technical Advisors to "Golf+" magazine for over 10 years
Largest contributor to "vwaudiforum.co.uk"
With our experience we can guide you to the right part for your car
We can problem solve and repair your vehicle in our workshops
Powerflex is proud to offer a Lifetime Warranty on the entire range of products that we manufacture.
We have taken this decision because of the confidence that we have in our products and the way that we have handled any warranty issues in the past.
We have never had a time period-based warranty policy because we have always treated issues that customers have had as an opportunity to learn.
Where a problem has occurred due to incorrect fitting, we have always asked ourselves if the reason for the error was due to poor fitting instructions.
When we have had a part failure we have tried to understand if the part was being used outside of its design parameters, perhaps on a race car running slick tyres. In cases like this, should we be offering a specific motorsport compound?
Like all manufacturing, we have had the occasional material quality issue and, in these cases, we have always replaced parts without question.
So now we have decided to formalise our open and honest policy and commit to replacing any Powerflex product that any customer in the world is unhappy with.
The only conditions that we attach to this Warranty are:
All we ask in return is that anyone wanting replacement parts contacts us directly and sends us as much information as possible which will help us determine the reason for a problem.
By purchasing and using Powerflex products, you are agreeing to our Lifetime Warranty terms as set out above.