Description: This is a 1/2 HP Permanent Magnet DC Motor with Solid State Electronic Variable Speed Control + 1" Drive Pulley + 6" Driven Pulley + 26" V-belt. Please read the specs completely & carefully - 1/2 HP Permanent magnet DC motor
- 250 to 900 RPM no-load speed range when used with 1" drive pulley to 6" driven pulley with belt
- Clockwise rotation (facing end of motor shaft)(rotation can be reversed by switching power leads inside control box)
- TEFC (totally enclosed fan cooled)
- 2 Mounting options on motor face as follows:
- (4) Screws on the motor face in a 2-5/32" (55mm) circle 90 degrees apart
- (2) Openings on motor mounting bracket approximately 3-3/4" (95mm) apart to accept up to 5/16" (8mm) diameter bolts
- 5/16" (8mm) Diameter x 1-3/4" (45mm) long output shaft with flat for set screw
- Motor body is 3-5/32" (80mm) diameter x 5-1/4" (154mm) long with mount bracket installed
- DC Motor control (solid state)
- Input power: 110 Volts / 3.2 amps / 1 Ph / 60 Hz
- Controls motor speed from approximately 250 no-load RPM (slightly delayed soft start) to 900 no-load RPM when used with the pulleys and belt provided (1" pulley on motor...6" pulley on driven device).
- Control box measures 5-1/8" long x 3-1/8" wide x 2-3/8" deep
- With safety switch, variable speed control knob, built-in resettable circuit breaker with fuse
- With miscellaneous mounting hardware (nuts, bolts, washers)
- Heavy duty 6 ft grounded cord
- Motor produces its best torque in the top half of its speed range
- With 1" nylon drive pulley...8mm bore
- With 6" nylon & aluminum driven pulley ...8mm bore
- With 26" 2L V-belt (1/4" width)...If you need a longer belt, email us for longer sizes available
This is a complete motor / control package ready to be mounted to your lathe, drill, mill, or any other machine requiring a 1/2 HP variable speed drive. This system is brand new but will come in generic packaging. Please study the pictures and email with any questions. Thanks for stopping by. PLEASE NOTE: We sell other sizes of 2L pulleys and belts that fit this motor in our eBay store
Safety Note: It is the buyer's responsibility to determine if this high speed motor is suitable for your application, to mount it securely, and to operate it in a safe manner. Failure to do so may cause injury. Shipping weight is 7-1/2 lbs. |