Furniture Lifter / Bed Riser SET OF FIVE (for those beds with a center post)

If you need four lifters, please see eBay item 371850150898

Lift Height 7.5 Inches
Made in USA by Steve's Gift Shoppe
Choice of finishes available

These are extremely strong bed lifters. Douglas fir solid core, and strong enough to hold thousands of pounds per bed lifter. (Check with a structural engineer on that one). Made from a solid 6x6 Douglas fir core with trim at the top to create the recessed area for the bed legs. Base of the bed lifter is very stable, given that the base width is the same as the lift height.

Compression Strength of Douglas fir is 1300 to 1700 pounds per square inch.

Universal design to fit several different bed styles.  Great for square or round bed posts and even casters.  Ideal for trundle beds.

Specifications
Inside clearance 4 + 1/8th inches square (legs of bed should not exceed 4 inches width)
Outside width 5 1/4 Inches 

Recessed area height: 3/4 inches
(IF YOU NEED A CUSTOM RECESSED AREA SIZE, PLEASE MESSAGE US VIA EBAY)
Outside surfaces sanded and smoothed
Base ( bottom of bed lifter ) 7 1/2 x 7 1/2 inches width

Material: Douglas fir solid core Douglas fir exterior
Photo shows version with / and without dark walnut-color stain
Weight: Each lifter weighs about 5 pounds
Construction: All glue construction (we use a few finishing nails to help set the glued pieces)

FINISH OPTIONS: No finish, or dark wood stain finish, or painted

Stained Finish: All stained finishes will have three coats of shellac as a protective over-coat for a slightly glossy finish.

Painted Finish: For painted, you select the color in a Krylon brand (or common brand paint) and please select a color that we can easily obtain at our local hardware store or Wal Mart).

Caution: This product should be used with furniture legs that will fit within the recessed area and not create a ''tight'' fit. 

Caution: Use only in the upright position and do not use outside edges of this product for lifting purposes.  Upright position is defined as recessed area is up, and flat surface of opposite side is to the floor.

Caution: If using this product on a wood floor or a laminate flooring, it is advised to affix a protective felt or rubber pad under the lifters to protect from any damage to the flooring.

Shipping: Via Priority Mail (two boxes)