Furniture Lifter / Bed Riser
Lift Height 9 Inches
Made in USA by Steve's Gift Shoppe
Choice of finishes available

These are extremely strong bed lifters. Douglas fir solid core, and strong enough to hold thousands of pounds per bed lifter. Made from a solid grade one 6x6, Douglas fir solid core with trim at the top to create the recessed area for the furniture legs. Base of the bed lifter is very stable, given that the base width is the same as the lift height. Note: A 6x6 true dimension is 5 1/2 x 5 1/2 inches.

Compression Strength of Douglas fir is 1300 to 1700 pounds per square inch.  Confirm this with an engineer if you wish.

Universal design to fit several different bed styles.  Great for square or round bed posts and even casters.  Ideal for trundle beds.

Specifications
Inside clearance 3.62 inches square (legs of bed should not exceed 3.5 inch width)
Outside width 5.25 Inches 
Recessed area height: 0.75 inches
Outside surfaces sanded and smoothed
Base ( bottom of bed lifter ) 7.25 x 7.25 inches width

Note about lift height: Based on engineering guidelines, a column base can be 80% of the height. As such, a 7.25 base can support a 9 inch tall column. If you have questions, it is suggested that you check with a qualified engineer.

Material: Douglas fir solid core Douglas fir exterior
Photo shows version with / and without dark walnut-color stain
Weight: Each lifter weighs about 9 pounds
Construction: All glue construction (we use a few finishing nails to help set the glued pieces)

FINISH OPTIONS: No finish, or dark wood stain finish, or painted

Stained Finish: All stained finishes will have three coats of shellac as a protective over-coat for a slightly glossy finish.

Painted Finish: For painted, you select the color in a Krylon brand (or common brand paint) and please select a color that we can easily obtain at our local hardware store or Wal Mart).

Caution: This product should be used with furniture legs that will fit within the recessed area and not create a ''tight'' fit. 

Caution: Use only in the upright position and do not use outside edges of this product for lifting purposes.  Upright position is defined as recessed area is up, and flat surface of opposite side is to the floor.

Caution: If using this product on a wood floor or a laminate flooring, it is advised to affix a protective felt or rubber pad under the lifters to protect from any damage to the flooring.

Shipping: Via Priority Mail